1000FX+4GE+2POTS+CATV Triple Play P2P CPE  

Data Functions

1. Easy to access to Internet or internal network. P2600 series provide a 1000M uplink. You can flexible connect to an Ethernet P2P optical network.

2. 4 downlink 1000M Ethernet interface: The device integrates 4 L2 switch ports. Full speed non-blocking switching.
3. High performance forwarding ability: It integrates powerful network processor. There are 3 accelerators in the processor. It achieves nearly L2 wire speed forwarding capability, powerful throughput and load capacity.

4. Integrated simple firewall, support domain filter and IP address filter.
5. Support virtual server and DMZ host.
6. Rich network protocol: TCP/IP, UDP, RTP/RTCP, ARP, FTP/TFTP, HTTP, Telnet, ICMP, NTP/SNTP, DHCP Server/Client etc.
7. 2K MAC address table. 
8. 64 full range VLAN ID.
9. Powerful L2 switch function: VLAN bridging, port rate limiting, flow control, 4 IEEE802.1p QoS priorities, multicast(IGMP Snooping V1/V2), etc.
10. Support ToS(Type Of Service) and QoS.
11. Support TXT, Web and CLI, DHCP option 66/67 for auto configuration and firmware upgrade, configure easily.

VoIP Functions
1. Call protocol: SIP(IMS compatible), compliant with RFC2543 and RFC3261, seamless compatible with all popular call agent, including HUAWEI, ZTE, Alcatel-Lucent, etc. 
2. Integrate heartbeat function and support active/standby call agent.
3. Voice coding: ITU-T G.711/G.723.1(5.3K/6.3Kbit/s)/G.729, auto-negotiate with call agent.
4. Echo cancellation exceeding ITU-T G.165/G.168-2002, up to 128ms tail length.
5. Support high/low speed fax, bypass fax, and T38 fax.
6. Support high speed MODEM(56Kbps) dial access.
7. Support RFC2833 and redundant RFC2833, difference rings, MD5 authentication, CID, call forward, call waiting, hot-line call, alarm clock, and all kinds of value-added voice service.
8. Multi-party conferencing.
9. IP address assignment: dynamic PPPoE/DHCP Client and static IP.
10. Support TR069, WEB, IVR and CLI, configure easily.
11. Upgrade firmware remotely or on line.
12. Call loss less than 0.01%.
CATV Functions
1. RF frequency: 45~875MHz.
2. Turn on/off RF output remotely.
3. RF level can be showed on Web real time. Introduction

Application Chart