GPON ONT, buy 4 GE,2 PORTS WIFI FTTH GPON ONUTriple play Gpon OLT ONU on China Suppliers Mobile

Product Details

For more informaiton, please contact me directly:

Skype ID: linda.hyl

1GPON+2GE+1POTS+WIFI GPON ONU

Introduction

1GPON+2GE+1POTS WIFI GPON HGU terminal devices are designed for fulfilling FTTH and triple play service demand of fixed network operators or cable operators. These boxes are based on the mature GPON Chipset (BCM6838) technology, which have high ratio of performance to price, and the technology of 802.11n WiFi (2T2R), Layer 2/3 ethernet switching technology. They are highly reliable and easy to maintain, with guaranteed QoS for different service. And they are fully compliant with technical regulations such as ITU-T G.984.x.

Technical parameter

Technical item	1GPON+2GE+1POTS+WIFI GPON HGU
PON interface	1GPON connector, SC single-mode/single-fiber, Upstream 1.25Gbps,downstream2.5Gbps
Wavelength	Tx1310nm,Rx 1490nm
Optical interface	SC/PC connector
Interface	4x 10/100/1000Mbps auto adaptive Ethernet interfaces. 10/100M Full /Half Duplex, 1000 Full Duplex.RJ45 connectors.
Wireless	Compliant with IEEE802.11b/g/n, 300Mbps, 2T2R two internal antenna
LED	9, For Status of POWER,PON ,LOS,WiFi,Lan,Pair.
Operating condition	-5℃~55℃,10%~90%(non-condensed)
Storing condition	-30℃~60℃,10%~90%(non-condensed)
Power supply	DC 12V,1A
Power consumption	≤10W
Dimension	185mm×122mm×33mm(L×W×H)
Net weight	0.3Kg

Installation Requirements

1.1 Installation Environment Requirements

HGU equipment must be installed in the interior, and to ensure the following conditions:

Confirmation at the HGU installation at sufficient space to facilitate cooling machine.

HGU suitable working temperature of -5 ℃ ~ 55 ℃,humidity10% to 90%.

Device workplace should avoid radio transmitters,radar stations, andhigh-frequency interference frompower equipment.

1.2 Equipment Installation

Installed on the desktop

Place the machine on a clean bench, this installation is relatively simple, you can observe the following operation: Ensure the smooth work bench.Around the device enough space for heat dissipation.

Mounted on the wall

Observation HGU equipment chassis two cruciform recess, in accordance with the position of the groove, installed two screws in the wall.The original selected two mounting screws gently snap into recesses aligned. Slowly let go, so that the device under the support of the screw hanging on the wall.

Detail Information for the product

LED	Mark	Status	Description
Power	PWR	ON	The device is powered up.
Power	PWR	OFF	The device is powered down.
Registration	PON	ON	The device is registeredto theEPON system.
		OFF	Device is notregistered to theEPON system.
		Blink	Device is registering.
Opticalsignal	LOS	Blink	Device does not receive optical signals.
Opticalsignal	LOS	OFF	Device has receivedoptical signals.
Wireless	WiFi	ON	WiFi turned on.
		OFF	Device is power off or WiFi turned off.
		Blink	WiFi turn on and with ongoing data transmission.
Ethernet	LAN1 ~ LAN4	ON	Port is connectedproperly.
		Off	Portconnection exceptionor not connected.
		Blink	Port issending or/and receiving data.
Pair	Pair	ON	WPS client is connected. ( LED turn off after 5 minutes of successful connection)
		OFF	Does not use WPS or WPS client is connected.( LED turn off after 5 minutes of successful connection)
		Blink	WPS client is connecting.

Port Type	Function
LAN1~LAN2 port	Connect PC with Ethernet port by RJ-45 Cat5 cable.
PON port	Connect PON port with internet by SC/PC type, single mode optical fiber cable.
WiFi pair button (wireless pair)	Press down WiFi pair button to begin pairing.
WiFi turn on/off (WiFi)	Press down WiFi turn on/off button to enable/disable WiFi function.
Reset button (RST)	Press down reset button to make the device restart and recover from factory default settings.
Power port (DC12 V)	Connect with power adapter.

Equipment List

Contents	Quantity	Contents	Quantity
HGU	1 pcs	Poweradapter	1 pcs
User manual	1 pcs	QC card	1 pcs
Network cable	1 pcs	-

About V-Solution

V-SOLUTION is a professional manufacturer in China Guangzhou. Our company has established business relations with over 50 countries worldwide and more than 100 companies We devote to product GEPON ONU, GEPON OLT, GPON ONU, VoIP Gateway, Fiber CPE, Wifi Module, and so on.

Key distributors all over the world

FAQ
1.Can we get a lower price? Any Discount?
Yes,price is not a problem,everything could be negotiated based on the quantity.

2.Can I get a free sample?
Sorry that V-Solution is not available to new customer.

3.We are new in this PON fields,can you help me and recommend me some items?
Yes,of course.it is our pleasure to help you with it.
You only need to offer us more details about your application.

4.What is your MOQ?
No MOQ for any sample test,at least 100pcs/models after sample order.

5.OEM,ODM Service is available?
Yes,V-Solution have strong ability to offer customers ODM&OEM products of highest quality.
And it will requirement about your quantity.

6.For Trade Terms,such as payment and leadtime.
>Payment Terms:We mainly support T/T bank transfer,Paypal and Western Union
>Price Terms:EXW Guangzhou
>Shipping Methods: EMS,DHL,Fedex,TNT,UPS,by sea or your own shipping agent
>Leadtime: Sample order,3-7work days; Bulk order 15-25work days(after your payment )

7.How about the Warranty?
There are 12 months for the warranty.
While the warranty is not responsible for those broken by violence or updated with other brands.

Why Choose V-Solution
>>We have wide range of product series,such as xPON Products,voip gateway,P2P CPE.

>>Achieved ISO9001:2008, QC: IQC->IPQC->OQC

>>100% burn-in testing and 100% full testing before shipment

>>Strong production capability:20,000K pcs/month

>>Remote Technical support& Full Technical Document

>>Knowledgeable and Patient Sales

>>We will never sell or share your information

V-Solution, your best business partner !!!