Name: PP melt-blown filter cartridge
Brand: yofull
Availability: InStock

Product Details

PP melt-blown filter cartridge

Features:

Made of PP, its tubular filter materials is sintered by continuous PP long fiber through melt-blown process.
High filtering precision, large flowage, even structure, strong waste load capacity, long service life.
Good chemical compatiblity, no any additives, not easilly fall-off fiber.
Wide application, strong waste rejection capacity.

Technical parameters list

Precision	0.5 1 3 5 10 20 25 30 50 75 100
Length	5” 10” 20” 30” 40”	Working temperature	<60°c
Diameter	65mm	Maximum temperature resistance	<90°c
Filtering materials	PP	Max inlet pressure	5.2bar(25°c)
Support materials	PP(optional)	Max inlet pressure	2.6bar(25°c)
Materials of case	PP(optional)	Recommended changeover pressure difference	1 bar
Filtering area	0.05m²/10”	Max pressure difference	3.5bar(25°c)

Application

Security filtration before reverse osmosis
Sewage treatment
Filtration for high pure water
Prefiltration or terminal filtration for other chemicals

Materials of Construction
Membrane	Hydrophilic MCE
Support	PP
Core, Cage and Drainage	PP
End Caps	PP (222/226 with encapsulated stainless steel reinforcing ring)
O-rings/Gasket	Silicone/EPDM/Viton/TEV
Sealing Technology	Thermal Bonding, No Adhesives
Dimensions
Diameter	Φ68
Length	5 inch, 10 inch, 20 inch, 30 inch, 40 inch
Filtration Area, ft 2
≥ 6.4 per 10-inch element
Pore Size, μm
0.1, 0.22, 0.45, 0.65, 1.0, 3.0, 5.0
Maximum Differential Pressure
Forward: 4.2 bar @ 23 ºC ; 1.5 bar @ 85 ºC
Flow Rate & Pressure Drop , per 10-inch cartridge
0.1 μm	≥ 10 L/min at 210 mbar
0.22 μm	≥ 17 L/min at 210 mbar
0.45 μm	≥ 30 L/min at 210 mbar
Particle Removal Efficiency (%)
>98
Good Manufacturing Practices
Manufactured in an ANOW facility which adheres to Good Manufacturing Practices.