Product Details

direct factory uv glue for lcd repair renew lcd touch screen panel for wholesales

PRODUCT DESCRIPTION

uv glue for lcd repair renew lcd touch screen panel is a general purpose cyanoacrylate adhesive that provides a fast, strong and permanent bond to almost all non-porous surfaces.

uv glue for lcd repair renew lcd touch screen panel is designed to bond most metals, plastics, elastomers and will bond ceramics, wood and textiles among others.

uv glue for lcd repair renew lcd touch screen panel cures times vary according to the materials, but most combinations are very fast, fixing in 2~8 seconds.

FEATURES

Bonds in seconds—therefore faster production on assembly line

Excellent bond for a variety of surfaces

Ready to use product, no mixing required

Adequate chemical resistance

Small area is sufficient to get strong bond

Solvent-less adhesive

Bonds plastic, metals and rubbers, china and dissimilar substrates

TECHNICAL DATA

As Supplied – tested at 23 °C ±2 °C , RH50%±5%:

Item	Data
Aspect:	Clear Transparent Liquid
Gravity (g/cm 3)	1. 0 ~1. 1
Viscosity (mPa.s)	30~50
Service Temp ( °C)	-30 ~+80
Application Temp ( °C)	+5~+50

As Supplied – tested at 23 °C ±2 °C , RH 50%±5% :

Cured Aspect	Ultra Transparent Solid
Gravity, g/cm 3	1. 0 ~1. 1
Cured Speed (seconds)	9~15 Metal-Metal
	2~5 Plastic-Plastic
	1~4 Rubber-Rubber
Full Cure Time (hours)	24
Hardness (Shore A)	30~65
Shear Strength (MPa)	≥10
Elongation at break (%)	≤10
Volume Shrinkage (%)	≤8
Linear Shrinkage (%)	≤5
Adhesion Properties	non-destruction
Water Resistance	Good

APPLICATIONS

adhensive glue is the most common super glue in use, it can work best on hard plastics, metal, rubber, glass, ceramic, china, fabric, leather, vinyl and wood.

adhensive glue is ideal for fixing precious and semi-precious stones in jeweler. Useful for repairs of domestic electrical appliances like mixture, grinders, irons, etc.

adhensive glue is also used widely in the electronics industry and the white goods industry.

APPLICATION LIMITS

uv curing glue is not suitable for adapting to structural fitting and following situations:

1. To all surfaces that bleed oil, plasticizers or solvents such as wood immersed in oil, oil crack filler, and some uncured or sulfurized fat and to surface where is wet;

2. To the substrate that the surface temperature exceeds +50°C or apply at temperatures belo w 5°C;

3. Use in the manufacturer of IG units;

4. To the painted surfaces, may cause seal failure as the paint cracking or stripping;

5. To the surfaces that with direct touch of food.

6. Do not use for structural glazing.

7. Not recommended for continuous water immersion applications.

8. Not recommended for use in below ground joints or trafficable

9. Joints where abrasion and physical abuse are encountered.

10. Not recommended for some plastics such as polyethylene or polypropylene plastics.

HOW TO USE uv curing glue

Surface must be clean, dry and free from grease and old glue.

Mask smooth surface to simplify clean up.

Apply to one surface only.

Apply suitable pressure on bonding substrates.

Clean off excess adhesive with acetone.

Working Corner

uv curing glueSHELF LIFE

12 months in unopened packaging in a cool and dry storage place at temperatures between +5°C and 25°C.

Worldwide Exhibition

ZHENGZHOU HANDINHAND GLUE CO., LTD

Tel.:86-371-66888880

Fax:86-371-69112502

M:+86-15638412227

Add.:Ninggu Industrial Zone, Zhengzhou City, Henan Pro, China

Zip:450000

Country / Regin : China ( Mainland )

Province / State : Henan

City : Zhengzhou

Skype:sls502glue

You can contact us by Email , Skype , Trademanager , Telephone or Mobilephone and etc.