Specifications

Automatic wire mesh fence welding machine
Wire diameter:2.5-6mm
Mesh width:2.5m
Welding speed:35 times/min
Welding torch:48

Automatic wire mesh fence welding machine

 

Function characteristics:
1. It is integrative welding machine, controlled by PLC and HMI system
2. Do without cutting edge——save lots of material
3. Adjustable of distance of line wires——input the distance of cross wires, any character can reach.
4. Cross wires putting in device——better than before, having applying the patent.
5. Adopt auto welding by software——reduce the demand for electricity and pollution of electricity grid.
6. The welding pressure is even and identical——guarantees the high quality of all the welding spots.
7. The transformers and the electrodes up and down adopts water-cooling——make the assembling unit work reliably and continuously.
8. Wire feeding way: The line wires and cross wires should be pre-straightened and pre-cut.
9. Electric motor: General motor: 4kw, equipped with a frequency adjustable motor;

    Step motor: adjustable of step distance, ≥25mm——Mesh drawing method
10. Material: Suitable for low carbon iron wire, or galvanized (cold galvanized, hot galvanized) processing
11. Post-processing: 1. Bending machine (additional) width: 4m
                                       2. PVC coated

 

Application:

Guard fence mesh, fence barrier mesh, protection fence mesh for railway, highway, bridge, and building etc.

 

 

Technical Parameters:

Diameter	Welding aperture	Width of msh	Length of mesh	Welding head	Welding transformer	Welding speed
2.5-4mm	50*50mm	≤2.4m	≤6m	48*20mm	85kva*6	35times/min
4-6mm	100*100mm	≤2.5m	≤6m	24*20mm	85kva*6	35times/min

 

Accessorial part:
Electric control cabinet; mesh repairing machine (wire diameter ≤4m); straightening and cutting wire machine (at least 2 sets); Mesh pulling machine; bracket

 

After-sale service:
1.We can offer installation and train the workers for the customers.
2.Guarantee time:one year since the machine was installed at buyer's factory but within 18 months against B/L date.
3. We can help design the layout of the machine placed in the factory.