Specifications

flat tire sealant
1.one part,high strength,red paste
2.form a soft layer after cured
3.fill 0.50mm gap
4.50g/tube

   

                 Kafuter K-0518 Red Anaerobic Joint Sealant

Application

 

 (1) The filling gap is 0.5mm, especially seal in aluminum alloy surfaces, or relative-shifted compound surfaces. Like pumps, gear boxes, and vehicle-bridges   

(2) used as a form-in-place gasket on rigid flanged connections.e.g.gearbox and engine casings.the thixotropic of nature of K-0518 reduces the migration of liquid product after application to the substrate. 

 

Characteristics

Single component, great flexibility, high intensity anaerobic flange sealant, can replace any gasket instantly, good medium resistance, can form a soft layer after cured.

 It cured when confined in the absence of air between close fitting metal surfaces.

 

Typical properties

 

Appearance	red paste
Viscosity(cps/25°c)	≥500000
Specific Gravity	1.05~1.15
Flash Point(°c)	>108
Initial Cure Time(min)	≤60
Full Cure Time(25°c)	24h
Max Seal Pressure	≥36
Work Temperature(°C)	-54~150
Storage Life(25°c)	12 months at 15°c~28°c

 

 Packing Specifications

 

50ml/soft tube	10tube/box	100tube/carton
300ml/plastics tube	30tube/box

 

User's Guide

 

1. For best performance bond surfaces should be clean and free from grease.

2. It can replace most gaskets up to 0.5mm in the thickness, and can coat hard or soft cut gaskets to improve sealing performance.

3. Apply manually as a continuous bead or by screen printing to one surface of the flanges.

4. Flanges should be tightened as soon as possible after assembly to avoid shimming.