Specifications
mylar adhesive tape1.one part,flexible liquid
2.for metal to glass bonding
3.cure under UV/V Lamp
4.50ml/bottle
Kafuter K-303 Leather Adhesive Tape Cyogenic Adhesive Tape Mylar Adhesive Tape
Characteristics:
UV light curing adhesive is one-part, high intensity, uv curing modified acrylic adhesive. general purpose, good storage abilitiy, and have great adhesion to glass, crystal, and many other metals. Especially for small area of metal to glass, and glass to glass bonding.
Application: Using in glass with metals bonding, excellent bonding of glass, crystal, and metals like aluminum, carbon steel, stainless steel, and galvanized sheet steel, etc.
Typical Properties:
| Test Item | UV Adhesive/UV Glue K-303 |
| Viscosity | 600±100 mpa |
| Appearance | colorless or pale yellow liquid |
| Set Time | 6s/high flourescing light 10s/ UV light |
| Cure Time(s) | 200s/high flourescing light 300s/UV light |
| Harness(Shore A) | 69 |
| Elongation at Break(%) | 120 |
| Shear Strength | >10mpa |
User's guide:
Kafuter uv light adhesive is recommended for big area glass or crystal bonding .uv adhesive K-303 can be cured by exposure to UV/Visible light of sufficent intensity. surface cure is enhanced by exposure to uv light in the 200 to 260 nm range. cure rate and ultimate depth of cure depend on light intensity,spectral distribution of the light source, exposure time and light transmittane of the substrate through which the light must pass.
Notes:
1.This product is light sensitive, exposure to daylight, UV light and artifical lighting should be kept to a minimun during storage and handling.
2.For best peformance bond surfaces should be clean and free from grease.
3. cure rate is dependent on lamp intensity, distance from light source, depth of cure needed or bondline gap and light transmittance of the substrates through which tha radiation must pass.
Packing Specifications:
10ml/bottle | 10bottle/box | 100bottle/case |
50ml/bottle | 10bottle/box | 80bottle/case |
250ml/bottle | 10bottle/box | 40bottle/case |
