Specifications
retaining compound1.green fluent liquid
2.low viscosity,high strength
3.max gap filling:0.13mm
4.50ml/bottle
Kafuter K-0609 rubber repair compound curing compound retaining compound
Main Characteristics:
General purpose,one-part, high strength, low viscosity anaerobic retaining compound adhesive.
Technical Properties:
Testing Item: | K-0609 Anaerobic Retaining Adhesive |
Main Ingredient: | Methacrylate |
Appearance: | green liquid |
Specific Gravity: | 1.05~1.10g/m3 |
Viscosity: | 100~300 |
Shear Strength(Mpa) | ≥10 mpa |
Working Temperature: | -54~+149°C |
Room Cure time(at 25°c): | 20 minutes(initial cure time) 24 hours (full cure time) |
Max Gap Filling: | 0.13mm |
Applications:
K-0609 is designed for bonding of cylindrical parts.
(1) Retaining metal cylindrical parts less than 0.1mm radical clearance to strengthen fitting strength, and prevent metal fretting and corrosion.
(2) Using in transition, interference, clearance fittings, and retaining belts, pulleys, gears, motors, and other cylindrical parts required to be polished.
FOR Assembly:
1.For Slip Fitted assemblies: apply adhesive around the leading edge of the pin and the inside of the collar and use a totating motion during assembly to ensure good coverage.
2.For Press Fitted Assemblies: apply adhesive thoroughly to both bond surfaces and assemble at high press on rates.
3.For Shrink Fitted Assemblies: the adhesive should be coated onto the spin, the collar should then be heated to create sufficent clearance for free assembly.
Storage:
store product in the unopened container in a dry location.
Optimal Storage:15°c~28°c
Shelf Life:12 months
Note:
(1)This product may produce some irritating odor during working time. if contact with your eyes or skin, pls flush with water, if become serious, you should go to hospital.
(2) Material removed from containers may be contaminated during use. Do not returen product to the original container.
Packing:
5oml/bottle | 10bottle/box | 80bottle/carton |
250ml/bottle | 10bottle/box | 40bottle/carton |