HX1AM-NCC 0.45HP Rotary Vane Blade Air motor
USD $100 - $200 /Set
Min.Order:1 Set
Rudong Hongxin Machinery Co., Ltd.
HX1AM-NCC 0.45HP Rotary Vane Blade Air motor
Known industry wide for their rugged construction and reliability,Hongxin Air Motors are used in a variety of applications.
Lubricated Air Motors come in seven basic models up to 9.5HP (7.1KW),motor speeds are variable from 300 to 10,000 RPM.Choose from hub,foot,face,NEMA C-Flange or Metric D series interface mountings and clockwise,counterclockwise or reversible rotations.
With compressed air as actuation medium, rotary vane air motors make use of the expansion of compressed air to convert
pressure energy into mechanical energy. They can be regulated easily for speed and torque, and can stop and reverse very
quickly. They are commonly used in many industrial and spark-prohibited applications.
Performance Overview
BLADE AIR MOTOR | ||||||||||
Model | Operation Data | Maximum Torque | ||||||||
Power | Torque | Rotate Speed | Air Consumption | Rotate Speed | Torque | |||||
hp | kW | Nm | lb.in | rpm | m³/h | cfm | rpm | Nm | lb.in | |
HX1AM | 0.45 | 0.33 | 0.31 | 2.75 | 10000 | 35.1 | 20.5 | 650 | 0.65 | 5.60 |
HX1UP | 0.45 | 0.33 | 0.58 | 5.25 | 6000 | 47 | 27 | 500 | 0.68 | 6.00 |
HX2AM | 0.93 | 0.68 | 2.20 | 19.50 | 3000 | 49.5 | 30 | 350 | 3.05 | 26.10 |
HX4AM | 1.70 | 1.30 | 4.10 | 36.00 | 3000 | 132.5 | 78 | 300 | 6.3 | 56.00 |
HX6AM | 4.00 | 3.00 | 10.00 | 84.00 | 3000 | 228 | 128 | 300 | 13 | 115.00 |
HX8AM | 5.25 | 3.90 | 14.40 | 132.00 | 2500 | 293 | 175 | 300 | 21 | 185.00 |
HX16AM | 9.50 | 7.00 | 34.00 | 290.00 | 2000 | 475 | 275 | 300 | 43 | 372.00 |
*Four and eight vane models are also available.
Typical Applications
Mixing Turntables
Tension Devices
Fiberglass Choppers
Hose Reels
Hoists and Winches
Pharmaceutical Packaging
Food Packaging
Pump Drives
Conveyor Drives
Dimensions(Inches/mm)
Troubleshooting Chart
Symptom | Possible Cause(s) | Corrective Action |
Doesn’t Run. | 1. Dirt or foreign material. 2. Internal rust. 3. Motor is jammed. 4. Worn Vanes 5. Bearing Failure | 1. Inspect and wash. 2. Inspect and wash. 3. Disassemble and clean. 4. Inspect and replace. 5. Inspect and replace. |
Runs Well Then Slows Down. | 1. Restricted exhaust. 2. Motor requires cleaning. 3. Air source inadequate. 4. Air source far from motor. 5. The sealant is corrosion. | 1. Inspect and repair. 2. Disassembly and clean 3. Check air resource. 4. Adjust air resource. 5. Inspect and replace. |
Low Torque. | 1. Dirt or foreign material. 2. Low air pressure. 3. Motor requires cleaning. 4. Worn out bearings. 5. Worn air motor vanes. 6. The sealant is corrosion. | 1. Disassemble and clean. 2. Increase pressure. 3. Disassembly and clean 4. Inspect and replace. 5. Inspect and replace. 6. Inspect and replace. |
Low Speed. | 1. Dirt or foreign material present. 2. Internal rust. 3. Low air pressure. 4. Air source restricted. 5. Restricted exhaust. 6. Motor is jammed. 7. Air source CFM inadequate. 8. Air source far from motor. 9. Worn Vanes | 1. Disassemble and clean. 2. Inspect and wash. 3. Increase pressure. 4. Check air hose. 5. Inspect and repair. 6. Disassembly and clean. 7. Check air resource. 8. Adjust air resource. 9. Inspect and replace. |