Zinc Enough-GL/ PPGL /PPGI/ GI
USD $600 - $700 /Ton
Min.Order:25 Tons
Shandong Dawang Jintai Group Co., Ltd.
Zinc coated | 40-80g( as customer required) |
thickness | 0.135-3.0mm |
width | 900-1250mm(914mm/1000mm/1200mm/1219mm the most common) |
grade | DX51D ,SPCC |
Spangle | Mini/zero spangle (as required) |
Surface | Oiled/skin passed/chromated(as required) |
Each coil weight | 2-9tons (as required) |
Payment | T/T ,L/C at sight, |
Zinc coated | 40-80g( as customer required) |
colour | Ral standard (as required) [sea blue/white grey/bright red the most common] |
thickness | 0.135-0.8mm |
width | 900-1250mm(1000mm/1200mm the most common) |
Paint type | PET..PU..EPOXY |
Each coil weight | 2-9tons (as required) |
Payment | T/T ,L/C at sight |
Galvalume Steel Sheet-GL
Standard | ASTM A792/ A 792M JIS G3321 |
Base-Metal Thickness | 0.26 - 1.0 mm |
Width | 900 - 1250 mm |
Inside diameter | 508(20’’), 610 mm(24’’) |
T-bend | 0T-3T |
Yield strength | >300MPa |
Coating mass | AZ25 - AZ150 |
Spraying brine | Min 200 hours |
Surface Finish | Minimized Spangle |
Surface Treatment | Chromated Treatment, Oiled or Resin Coated (anti Finger Print) |
|
|
Pre-painted Galvalume Steel Sheet-PPGL
Standard | JIS G3312 |
Base-Metal Thickness | 0.26- 1.0 mm |
Width | 900 - 1250 mm |
Inside diameter | 508(20’’), 610 mm(24’’) |
T-bend | 0T - 3T |
Gloss | 30-80% |
Yield strength | >300MPa |
Hardness | ≥ 40 HRB |
Adherence degree | No peeling |
Top coating side | 4+8/5+15/5+20 µm |
Back coating side | 5 -7 µm |
Durability of solvent/thinner | MEK ≥ 100 DR |
Coating mass | Z25 - Z150 |
High impact test | 1800gx200mm (min) – No peeling |
Guard film (optional) | 30um/50um |
Color | As per RAL Code or as per customer’s requirements |