Product Details

ESD5500E speed controller:

Product Description

The 5500E Series speed control unit is an all electronic device designed to control engine speed with fast and precise response transient load changes.

*ESD5520E is designed for EFC series.

*Isochronous Operation/Steady Stability---- +/-0.25% or better

*Supply----12 or 24 VDC Battery Systems(transient&reverse voltage protected)

*Power Consumption----50 ma continuous plus acutator current

*Maximum Actuator Current at 25celsius (77celsius F)----10 Amps continuous

Input	Supply	12 or 24 VDC Battery System (Transient and Reverse Voltage)
	Polarity	Negative Ground (Case Isolated)
	Power Consumption	50 ma continuous plus actuator current
	Actuator Current Range @ 25 Deg. C - (Inductive Load)	Min.2.5 Amps; Max. 10Amps continuous
	Speed Sensor Signal	0.5-120 Volts RMS
Performance	Isochronous Operation/Steady State Stability	±0.25% or better
	Speed Range/Governor	1K to 7.5K Hz continuous
	Speed Drift with Temperature	±1 Max
	Idle Adjust CW	60% of set speed
	Idle Adjust CCW	Less than 1200 Hz.
	Droop Range	1-5% regulation
	Droop Adj. Max. (K-L Jumpered)	400 Hz., ±75Hz. Per 1.0A change
	Droop Adj. Min. (K-L Jumpered)	15Hz., ±6Hz. Per 1.0A change
	Speed Trim Range	±200 Hz
	Remote Variable Speed Range	500 - 7.5 Hz. Or any part there of
	Terminal Sensitivity J	100 Hz., ± 15Hz / Volt @ 5.0 K Impedance
	Terminal Sensitivity L	735 Hz., ±60 Hz / Volt @ 65 K Impedance
	Terminal Sensitivity N	148 Hz., ±10 Hz / Volt @ 1 Meg. Impedance
	Terminal Sensitivity P	10 VDC Supply @ 20 ma Max
Environmental	Ambient Operating Temperature Range	-40 to +85 Deg. C
	Relative Humidity	Up to 95%
	All Surface Finishes	Fungus Proof and Corrosion Resitant
Reliability	Vibration	1G at 20 to 100 Hz.
Reliability	Testing	100% Functionally Tested
Physical	Dimensions	See outline (FIGURE 1)
	Weigh1	1.2 lbs.(545 grams)
	Mounting	Any position, Vertical Preferred