Multi-directional Tilt Switch sensor (Z-Axis Measurement) with Siwtch output type
Negotiable /Piece
Min.Order:1 Piece
Shenzhen Rion Technology Co., Ltd.
digital type dual-axis tilt switch sensor (switch output), IP67, resolution 0.01deg
Inclinometer sensor switch Four axis output Security control,monitor,alarm
SCA140T Four-axis dip switch with built-in Relay,ZERO setting function Full Metal Jacket,IP67
Tilt Switch Alarm Security System , Tilt Switch Vibration System Small Size Design Low Cost
Multi-directional Tilt Switch sensor (Z-Axis Measurement) with Siwtch output type
General Description
SCA131Z is a digital dual-axis tilt switch developed by RION company to the Z–Axis measurement application , level security alarm and platform level detection related industry application .In industrial applications, it is unpredictable the measured object inclination towards X or Y direction ,which means that the 360-degree horizontal posture may tilt to any one direction, under this application if you use single-axis X or dual-axis XY unable to accurately measure, the Z-axis tilt can meet customer demand, integrated operation of the X-axis and Y-axis data, get the Z-axis tilt angle.
Users can set alarm angle value by themselves, it will output the switch signalwhen exceeds the safety angle value,will cut off the hydraulic system, also can drive the alarm to warn the worker to operate safely .This product with design precision, again to compensate the temperature and linearity, integrated short-circuit, transformer, and surge etc. fullprotection functions, suitable for a variety of harsh industrial environments operating. Using the industrial grade MCU, three-anti PCB, import cable, wide temperature metal enclosure and other measures etc. to improve the industry level on products reliability and stability.
Features:
*Z-axis tilt measurement
*Accuracy:please refer to the technical data
*RS232 series output
* Switch output(high-low level)
*Resolution : 0.01°
*Wide temperature working: -40~+85°C
*IP67 protection class
*Highly anti-vibration performance>2000g
*Direct lead cable interface
*Customer can set alarm angle value by himself
* With Setting 0° function
* Positive/negative direction output is optional
*DC 9~36V wide voltage input
Application:
*Engineering mechanical vehicle
*Rail-mobile monitoring
*oil-well drilling equipment
*Engineering mechanical measurement of dip angle
*Underground drill posture navigation
*Satellite communications vehicle posture detection
*Pier posture measuring
*Gun Barrel angle measurement in early shooting
*Rubber hose flexural measuring
Technical Data
Parameters Conditions SCA131Z-P015 Unit |
Measuring rang | ±85 | ° |
Measuring axis | Z Axis |
|
Resolution | 0.01 | ° |
Absolute accuracy | 0.05 | ° |
Long term stability | 0.05 |
|
Zero temperature coefficient | 0-40~85° ±0.006 | °/°C |
Sensitivity temperature coefficient | -40~85° ≤100 | ppm/°C |
Power on time | 0.1 | S |
Response time | 0.2 | s |
EMC | According to EN61000 and GBT17626 | |
MTBF | ≥50000 hours/times | |
Insulation Resistance | ≥100M | |
Shockproof | 100g@11ms,3Times/Axis(half sinusoid)) | |
Anti-vibration | 10grms,10~1000Hz | |
Protection glass | IP67 | |
Cables | Standard 1M length,wearproof,grease proofing,wide temperature, Shielded cables 4*0.4mm2 | |
Weight | 120g(without cable) |