Temp Products, buy Non-contact Level Measurement Cost-effective Inclinometer by Factory on China Suppliers Mobile

Product Details

Specifications

Cost-effective Inclinometer
1. High performance
2. no-contact measurement
3. Stable & reliable
4. Low cost

Non-contact Level Measurement Cost-effective Inclinometer by Factory

Product Description

Technical Data

Measuring range		±10	±30	±60	±90	°
Measuring axis		X,Y	X,Y	X,Y	X,Y
Resolution		0.1	0.1	0.1	0.1	°
Absolute accuracy		0.1	0.2	0.3	0.4	°
Long term stability		<0.5	<0.5	<0.5	<0.5
Zero temperature coefficient	-40~85°	±0.008	±0.008	±0.008	±0.008	°/°C
Sensitivity temperature coefficient	-40~85°	≤150	≤150	≤150	≤150	ppm/°C
Power on time		0.5	0.5	0.5	0.5	S
Response time		0.05	0.05	0.05	0.05	S
Output rate	5Hz,15Hz,35Hz,50Hz can be setting
Output signal	RS232/RS485/RS422/TTL/PWM/CAN/MODBUS can be customized
EMC	According to EN61000 and GBT17626
MTBF	≥45000 hours/times
Insulation Resistance	≥100M
Shockproof	100g@11ms,3Times/Axis(half sinusoid))
Anti-vibration	10grms,10~1000Hz
Protection glass	IP67
Cables	Standard 1M length,wearproof,grease proofing,wide temperature, Shielded cables4*0.4mm2
Weight	90g(without cable)

LCA326Tseries products which launched by RION company is a new generation digital type small size MEMS inclinometer , Built-in two channel gravity tilt unit, by measuring the static gravity acceleration then convert into the inclination change. Thus can measure the inclinometer output relative to the horizontal tilt and pitch tilt. Output RS232, RS485 or TTL level interface standard optional. Because of built-in MCU control system, that make the sensor output linearity get two amendments, made up the analog type precision drop because of insufficient correction led to .
This product adopts the non-contact measuring principle, can real-time output the current attitude angle, simple to use, no need to find the relative variation of the two surface for mounting. It is a ideal choice for Industrial automation control and platform measuring attitude,strong ability of resisting external electromagnet interference, can be adapted to long-term working in the industry harsh environment. This product is suitable for the static and slow changes dynamic measurement, not suitable for rapid changes dynamic measuring.