Specifications

1.Higher brightness Without any radiation
2.Lower power consumption
3Longer span time flexible material
4Super-thin

  car sticker el equalizer panel 

 

Detailed Product Introduction:

Flashing car sticker--It is our recently developed high-tech light-source products after a few years' research. It is a layer of soft and thin sheet be sticked on rear windshield or side window, wherever you feel appropriate. Use driving equipment, plug it to 12VDC power, it can produce beautiful effect; also, it increases safety while you are driving at night. At the mean time, it helps to make your car looks attractive and fashionable.

Installation:

This product is furnished with double faced adhesive tape and is covered with a protective membrane, you can remove membrane and stick to back windshield. Meanwhile, the product is outfitted with a cupule and you can press it directly to windshield.

 

 Wire connection:

A power cord with anode and cathode comes from the wire system of the small light which shows the width of a car, you can directly connect them together by connecting red cord to anode and back to cathode, it will light when you power-on the small lamps at night. Furthermore, the product is equipped with a white wire which will be connected to the anode of the wire of brake to make a brake lamp. When you push the brake, the twinkling of product will be changeable. However, it will has no impact on the product effect if you would not like to make use the white wire.

Moreover, if there is a trouble for you to connect the wires in the car, you can demand to equip a lighter for cigarette instead, the lighter can be directly inserted into car to make lamp lightening. Please note that the quoted price does not include cost of fittings of lighter for cigarette.

 

Materials in nowadays:

1)Ultra-thin(05mm~1.5mm) & light weight;
2)Flexibility---It can be made into various shapes.
3)It is easy for installation
4)All details can be customizable,such as the size,picture,animation as well as the
  accessaries you want it to be. It is totally  "OEM products";
5)Tender light---EL is a sort of light that can spread over the entire surface without harming eyes.
6)With the "advertising spirit" that presented by the sequences of animations;
7)Can be water proof. This is usually asked for by outdoor project.
8)With safe using environment of no-heating,low voltage and low power comsumption of only
  5W-10W.
9)High visibility and no ultraviolet radiation is generated.

10)Rich in color --- many colors and different animated lighting areas are available.

11)span time: more than 8,000-10,000 hours. 

 

Detailed Product Introduction:

Flashing car sticker--It is our recently developed high-tech light-source products after a few years' research. It is a layer of soft and thin sheet be sticked on rear windshield or side window, wherever you feel appropriate. Use driving equipment, plug it to 12VDC power, it can produce beautiful effect; also, it increases safety while you are driving at night. At the mean time, it helps to make your car looks attractive and fashionable.

Installation:

This product is furnished with double faced adhesive tape and is covered with a protective membrane, you can remove membrane and stick to back windshield. Meanwhile, the product is outfitted with a cupule and you can press it directly to windshield.

 

 Wire connection:

A power cord with anode and cathode comes from the wire system of the small light which shows the width of a car, you can directly connect them together by connecting red cord to anode and back to cathode, it will light when you power-on the small lamps at night. Furthermore, the product is equipped with a white wire which will be connected to the anode of the wire of brake to make a brake lamp. When you push the brake, the twinkling of product will be changeable. However, it will has no impact on the product effect if you would not like to make use the white wire.

Moreover, if there is a trouble for you to connect the wires in the car, you can demand to equip a lighter for cigarette instead, the lighter can be directly inserted into car to make lamp lightening. Please note that the quoted price does not include cost of fittings of lighter for cigarette.

 

Materials in nowadays:

1)Ultra-thin(05mm~1.5mm) & light weight;
2)Flexibility---It can be made into various shapes.
3)It is easy for installation
4)All details can be customizable,such as the size,picture,animation as well as the
  accessaries you want it to be. It is totally  "OEM products";
5)Tender light---EL is a sort of light that can spread over the entire surface without harming eyes.
6)With the "advertising spirit" that presented by the sequences of animations;
7)Can be water proof. This is usually asked for by outdoor project.
8)With safe using environment of no-heating,low voltage and low power comsumption of only
  5W-10W.
9)High visibility and no ultraviolet radiation is generated.

10)Rich in color --- many colors and different animated lighting areas are available.

11)span time: more than 8,000-10,000 hours.