Specifications

RS232 3D Compass
1.Heading accuracy:0.5 degree
2.Small size,
3.low power consumption
4.Customized

High Accuracy RS232 3D Compass 3 Axis Fluxgate Sensor      

 

DCM308 is a high accuracy electronic compass(north seeking) with 80 degrees tilt compensated. Which uses advanced algorithms, with hard iron and soft iron corrections, to provide highly accurate heading information over its extra wide tilt range at latitudes up to 50 degrees. The small size and low power requirements of the DCM308 allow it to fit into today’s size sensitive systems. These advantages make RION Corporation's DCM308 the choice for applications that require highest accuracy and performance anywhere in the world. 

Features include an extra wide tilt range, high accuracy compass heading, low powerconsumption, large signal noise immunity under all conditions, and a large magnetic field measurement range in a small package. 

The DCM308 combines USA patented Magneto-Inductive (MI) sensors and measurement circuit technology with a three-axis MEMS accelerometer for unparalleled cost effectiveness and performance. The magnetic sensors and accelerometers are calibrated to operate from -40 to 85°C; hence the measurement is very stable over temperature and inherently free from offset drift.
DCM308 adopts high-tech levels such as MCU, Water-proof, dust prevention and anti-corrosion PCB, import cable,wide temperature metal-clad ,and so on, to improve the stability and reliability.

 

Features:

Heading Accuracy: 0.5 degrees                                     Heading resolution:0.1 degrees

pitch accuracy:0.08 degrees                                         Pitch resolution:0.01 degrees

Roll accuracy:0.08 degrees                                           Roll resolution: 0.01 degrees

Power supply:5V                                                         Current draw:29mA(Sleep mode:1mA)  

Maximum Dip Angle: ±90 degrees                                 RS232/RS485/TTL Optional           

Small size: L50*49*15mm                                            Small form factor Low power consumption

Hard and soft iron correction with quality of calibration score

Limited Tilt User Calibration                                          Widely working temperature: -40-+85 degrees celsius

Storage temp:-45-+125 degrees celsius

 

Applications:
High performance ROV navigation                                  GPS system integration
Vehicle tracking                                                            Remote terrestrial antenna direction indicators
Sonar targeting systems                                              3-axis magnetic field sensing

Survey equipment                                                       Autopilot
Satellite positioning Search                                           Robotic systems
Navigation system

Product Show

Electrical Characteristics

Ordering information

Dimension

DCM308B Measuring Directions&Fix

The DCM308B 3D electronic compass azimuth is using geomagnetic principle, so it is very important to 

select a minimum magnetic interference environment for installation positon. Please place and install the DCM308B away from the iron, magnets, engines and other magnetic objects as much possible as you can. Need control over 40CM distance(different magnetic interfere with the compass in different distance ) at least even there are these magnetic medium around . In order to ensure optimal measurement environment please must use the M4 anti-interference screws for installation .

Shenzhen RION, as a positon sensor manufacturer and solution expert, attaches much importance to products reseach and develop which spend over 20% of annual profit. We have the most R&D personnel and best technology comparing with our peer to raise our up on the high level of sensor field. And we orientate ourself to market tightly and engage ourself into providing the most considerate and professional solution and service to customers. RION introduce advanced equipment, such as TEMP&HUMI chamber, salt spray corrosion test chamber, high precision automatic turntable, high precision marble checking platform, digital thermostat drying oven, electrostatic discharge tester and 360 degree mechanical turntable etc, and set up Environmental Testing Laboratory, Product Aging Chamber, 2D&3D Posture Calibration Room and Shake&Impact Test Room for R&D and factory test.

Beside owning excellent hardware, RION also developed 15 sets of software independently and keep developing, including multi-sensor monitor software, remote sensor monitor software, synchronous dynamic l tracking 3D presentation software, tilt switch early warning and debugging software and sensor serial port setting presentation software etc which could apply to XP, Win7, Win8, WinCE and Android system. RION, owning talent and diligent personnel, advanced technology and market-orientated strategy, engages itself in offerring you the most considerate and professional solution and service of position sensor.

You satisfaction is our ultimate destiny.

Certificates & Honor

Packaging: carton with sponge  

We will ship your order within 7 business days after we receive the full payment.

If you choose ship by DHL/UPS/FEDEX/TNT,it will take 3-5 work days; If you choose EMS ,it will take 5-7 work days. 

we are solution expert, we can make as your own design,shape,size,color and any other requirements.Any time when you received the goods,you will find them very personalized in the target market.

Being a professional manufacturer of tilt sensor, vibration sensor, compass etc, we will provide service and technical support before, in the middle of and after sales.

We accept the payment by Escrow/Alipay,including Paypal,Credit Card and T/T, WU.