Specifications

rf coaxial connector
1brass/zinc /Alum
2Plating: nickel
3wide frequency range,nice looking
4O-ring wateproof

 Alum feed through trunk rf coaxial connector

Impedance:                    75 Ω

Temperature Range:      -55~+155 ^oC

Frequency Range:           DC~7.5GHz

 Insulation resistance :    ≥ 10000 M Ω

Center conductor retention force       ≥6N

Voltage standing wave ratio

Durability(mating)           ≥500 (cycles)

Body:             brass & zinc  and nickel  plated

 ---------------------------------------------------------------------------------

3-piece trunk and distribution connectors are used in low power RF, video, data signals and powered broadband systems. Chassis mounting connectors are used in 5/8-24 equipment entry.

· Independent seizing of the center conductor permits installers to physically verify the center conductor has been seized prior to tightening the back nut

· Placement of the integral mandrel of the connector in the main nut provides a full view of the center conductor’s entrance into the seizing mechanism and requires minimal pull back for ease of installation

· Domed insulator at the KS interface prevents moisture from collecting between the contact pin and connector body, reducing the possibility of corrosion

· The GRS connectors have a center conductor cutting guide
.

 ----------------------------------------------------------------------------------------------

Moisture-proof through durability design

Implementation of UV ozone-resistant and EPDM o-rings

Use aluminum alloy for excellent corrosion resistance

Beryllium copper contact pin with gold plating providing excellent RF conductivity

Three-piece auto seizing design

Cable center conductor cutting guide

Visible entry of center conductor into seizing mechanism

No torque wrench needed, metal to metal positive stop,ensures proper tightening of connector