Specifications

bnc pcb connector
1brass Plating: gold
2 type BNC pcb connector
3BNC connector: use on monitors
4impendence:50ohm

 

RF BNC connector characterisitcs:50ohm

1. spe cial bayonet design allows easy mating and unmating.

2.bnc 50 ohm connectors provide repeatable electronic performance from DC to 4 GHz.

3 bnC type connectors are designed to accomodate a large variety of RG and industry standard cables.

4.available in crimp, clamp, and twist on cable styles.

 5.  A full line of printed circuit board receptacles, bulkhead receptacles, and other accessories complement the product offering.

6. BNC series coaxial connector works well in lower microwave frequency applications including monitors, LAN, telecommunication devices and test equipment

 

BNC Electrical Ratings

Impedance	50 ohm	75 ohm
Frequency Range	DC to 4 GHz	DC to 1 GHz
VSWR	Straight	Right Angle
	1.3 max	1.35 max
Voltage Rating (at sea level, in R rms,50Hz)	500 max
Dielectric Withstanding Voltage(at sea level, in R rms,50Hz)	1500
Insulation Resistance	5000 M min
Insertion Loss	0.2 dB max @ 3.0 GHz
Contact Resistance	Center Contact	Outer Contact
	2.0 m max	2.0 m max

 

BNC Mechanical Ratings

Mating	Bayonet style snap-on coupling
Durability	500 matings max
Coupling Nut Torque	0.6 to 2.5 in-lbs
Coupling Nut Retention Force	101.2 lbs max
Contact Captivation	6.1 lbs max
Cable Retention	RG 174, 188, 316	RG 58,59
	12.1 lbs min	28.7 lbs min

 

 

Materials

		Material	Plating
Connector Body		Brass	Nickel
Center Contact	Male	Brass	Gold
	Female	Beryllium Copper	Gold
Insulator		Teflon, Delrin, Polypropylene	None
Gasket		Silicone Rubber	None
Crimp Ferrule		Annealed Copper per	Same as body