2015 hottest EVERPOWER EPA1210 high quality 7 stage automatic car battery charger
USD $10 - $14 /Piece
Min.Order:500 Pieces
Shenzhen Everpower Electronics Co., Ltd.
Everpower EPA1210 7 stage charge full automatic 12v 10 amp battery charger
Everpower microprocessor controlled full automatic 7 stage 12v battery charger
Top quality Everpower EPA1210 7 stage charging 12v car battery charger
Everpower EPA1210 7 stage automatic 12v 10ah battery charger
Newest Everpower EPA1210 7 stage automatic 12v battery charger dynamo charger
Everpower EPA1210 7 stage charge full automatic lead acid 12v output car battery charger
2015 hottest EVERPOWER EPA1210 high quality 7 stage automatic car battery charger
Everpower automatic car battery charger features:
Everpower automatic car battery charger specification:
P/ No. | EPA1207 |
Type | 7-Stage Automatic |
Input Voltage | 220-240V~, Hz 110V~, 600Hz |
Input Power | 215W |
Output Voltage/ Current | 12V DC, 7000mA |
Minimum Start Voltage | 2V |
Current Fuse Rating | 250V AC, T 3.15A |
CHARGE CONRTOL | |
Desulption | Pulse charge to 11V |
Soft start | Half the rated set current up to 12V |
Bulk | 7000mA (up to 14.4V) |
Absorption | Constant voltage until current drops to 1.05A |
Bettery test | Monitors voltage for 90 seconds |
Recondition | Constant current (1.05A) up to 16V for 14 hours. |
Float | 13.8V also with pulse feature. |
Efficiency | App. 85% |
Short Protect | Short Circuit Protection |
Polarity Reverse | Polarity Reverse Circuit Protection |
Non battery link protection | Circuit protection |
Link battery type mistake | Circuit protection |
Over voltage protection | 17.5 V |
Thermal Protect | 65°C +/- 5°C |
Cooling fan | Automatic temperature controlled |
BATTERY RANGE | |
Deep cycle | 50-140Ah |
Types of batteries | Most type of lead acid batteries including Calcium, GEL and AGM. |
Dimension (L x W x H) | 190 x 115 x 62 mm |
Weight | 1.03 kg |
Call us for more details datasheet.
Connection:
1. Cut off the supplied battery clips; ensure you leave sufficient cable to reach the battery terminals. (DO NOT extend the battery
charger DC cables, as the added voltage drop will cause incorrect charging)2. Fit a ring terminal to the BLACK Negative (-) wire.
3. Connect the inline fuse to the RED Positive (+) wire.
4.Connect a ring terminal to the other end of the inline fuse.
5.Connect the RED lead (with inline fused and ring terminal) to the Positive (+) battery post.
Best Services:
1. Your inquiry related to our products or prices will be replied in 24 hours.
2. Experienced staffs to answer all your enquires in fluent English.
3. We are doing the OEM and ODM service for more than 5 years. And the Paypal acceptance.
4. Protection of your sales area, ideas of design and all your private information.
5. No matter big order or small order , we will provide all the best quality , best service
6. If our products have any problem , we will send free in the next order if it is our mistake.
About EVERPOWER:
If you want to know more information about our products, welcome to contact with me in any time !