Specifications

Introduce:

Designed to lock together, each FD-700-42® sheet has a male and a female edge that forms a strong locking action when joined together. The anti-capillary shape of the female rib means water is stopped from entering through the side-laps. The clips are fastened to the purlins with hex head screws through the holes provided. Although the clips join the roof deck to the purlins, they still allow for expansion and contraction, which is important for long length roofing.

FD-700-42 ® Technical Information:                                                                             

Profile:

Product design:

Engineering example:                                                                                      

Material specification:

FD-700-42® Installation Information:                                                           

FD-700-40  concealed clip

The most important feature of FD-700-42 is the single piece concealed clip. Its innovative design ensures maximum performance of the roofing, superior spanning and ease of installation. It is suitable for a variety of industrial and commercial uses, and can be used where a low roof pitch is required and security is important. Buildings such as shopping centres, hospitals, industrial storage, factories and warehouses lend themselves to this style of roofing forits strong, reliable, no fuss application.

Step one: Fixing the concealed clip to Purlins

Step two: Place the first sheet over the clips ensuring a minimum projection of 75mm at the ridge and into the gutter.

Step three: Place the second sheet over the clips, ensure the end of the sheet aligns with the first sheet.

Install the remaining clips and sheets. Remember to frequently check the coverage to maintain squareness and adjust for creep where necessary. At the end of the purlin, cut the clips and deck where necessary to suit. To secure the final sheet edge, cut the end off the bracket, hook over the last rib and fasten. Finally, remember to turn up the pans at the ridge and down at the gutter end.

FD-700-42® fixing directions
	Roofing Concealed clip fixing
Fixing to steel Hex head self drilling screw
Fixing to timber Type 17 self drilling wood screw

Product Picture:

Finding Roof Panel®                                                          

Finding Roof Panel® will have a long, useful life if used according to specifications. While roofing materials in outer urban and rural areas may have a life-span in excess of 30 years.

Zinc/alum and pre-painted steel should not be used in very aggressive areas such as near swimming pools and spas. It is important that dirt, soil, compost, paving sand, or other materials which retain moisture are not placed against steel sheeting. Concrete should not be poured against zinc/alum material. Check with Finding® before using in these severe environments.

Handling and Cutting of Finding Roof Panel®         
For safety, wear gloves when handling roof panel. Ensure your hands or gloves are clean, especially when handling zinc/alum which can mark. Use a coloured pencil for marking steel, as lead or black pencils contain graphite which promotes rusting. Superdek is best cut using tin snips, but for larger cuts it may be necessary to use a power saw with a steel cutting blade or a power nibbler. Avoid using abrasive discs as they can cause burred edges and coating damage. Where possible cut sheets on the ground, and always clean off any swarf and metal filings progressively during the installation. Dispose of off-cuts carefully.    

Custom made for your project

Finding have more than 20 years for producing all kinds of roof sheet, We can according to your request to custom the roof panel.

Contact  us             

If you have interesting about our product please contact me, Let's talk more detail.