Easy construction building material eps sandwich panel high quality with factory price
USD $8 - $18 /Meter
Min.Order:500 Meters
Yifeng Clean Technology Jiang Su Shares Co., Ltd.
Features:
1)Weatherability
EPS covered with fiberglass alkali-resistant mesh and special glue and cement, it has particular weather resistance and durability. It will not crack, bubble and peel when being used in ultraviolet radiation, moisture, salt, heat and cold insulation for long time. Our products are durable and can resist the affects of rain, snow, wind, frost and or other bad weather.
2)Heat insulation and Fireproofing performance
Expandable polystyrene incorporated into the panel design shall provide a sufficient thermal break to ensure non-conductivity of temperature between surfaces. The building can reach the standard of energy-saving design without EIFS. It is ideal material for construction in both tropical and frigid countries, it will bring you a comfortable and safe habitation. The core of new self-insulation composite wall material is fireproofing EPS. The completed panels with finished surface are un-inflammable and its fire prevention performance reach A class of GB8624 standards according to testing results from National Center for Quality Supervision and Testing of Fire Building Material.
3)High supporting capability
Individual panel size and configuration is dependent upon project design requirements. The integrated galvanized antirust steel studs for strength is pre-inserted in the wall, and strength of our system depends on the specification and space of steel studs.
4)Installing easily and quickly
Iit is easy to install with some bonding glue. Our building systems create a single, one-piece corner or T-shaped connecting sections, eliminating the difficult problem of joints between two walls. Wall section is a fully structural, insulated system of factory made sections are easily to assembled on site. Several workers are enough for whole construction, and only need 1/3 time of traditional construction.
5)Excellent strength and durability
Our building systems is customized to the exact architectural drawings, design and specifications and can also be used for almost all kinds of foundation wall system as well as structural floor, wall and roof systems. Formed steel studs shall comprise the integral framework of all panels and sections. It provides lasting strength. Our system and panels shall meet or exceed all code requirements. The houses can be installed without other frame and make the building durable enough.
6)Wide applications
Our building systems could be widely used in exterior wall and partition of villas, residential houses, workshops, cold storages, security lodges, civil engineering, mobile toilets, rubbish centers, transformer substations, sentry boxes and other prefabricated houses.
7)Low Cost
When you are starting your next construction project, Considering our new building system to provide a solid foundation for building, you don't need specialized professionals for framing or insulation. Both steps are build right in to save your time and money. Whatever you are constructing residential homes or commercial or industrial buildings, our system can help you cut cost and time dramatically.
Roof Plate | Wall Plate | Cold storage plate | ||
The Thickness of Base Plate | 0.4-0.8mm | 0.4-0.8mm | ||
The Thickness of Core Material | 50-150 mm | 50-150 mm | Length | ≤14mm |
Unit Weight of Core Material | 40kg/m³ | 40kg/m³ | Thickness | 100 125 150 175 200 mm |
Covering Width | 1000mm | 1000mm | Width | 1000mm |
Wave Height | 40mm | -- | Average density | 35-55kg/m³ |
Heat Insulation Material | PUR/PIR | PUR/PIR | Coefficient of heat conductivity | 0.019Kal/mh°C |
Surface Appearance | Ripple effect, Flat effect, Relief effect, Square wave effect.(no ripple effect for roof plate) | |||
Color | Offwhite, silver gray, sea-blue, crimson etc. Pls take the color of material object as the standard. | Compressive strength | ≥0.2MPa | |
Recommended Coating | Polyester coatingPE, SMP coating, HDP coating,Fluorocarbon coating PVDF,etc. | Working temperature | ||
Recommended Plating | Hot dip galvanized, AL-Zn coated | Highest | 90°C | |
Installation Method | --- | Horizontal (latitudinal) Vertical (longtudinal) | Lowest | -120°C |
Our service:
1) 7*24h online service, warmest and the most patient.
2) samples are free but the fees for transportation should be in your charge.
3) installation,technology support and training by extra.
4) post-sale service by extra
1.Payment:
(1) T/T, L/C are acceptable.
(2) Price Term: FOB Shanghai.
2.Pls feel freely to contact us.
(1)Facebook:Sophia Li
(2)Skype:sophialicaicai
(3)QQ: 2805460938
(4)Fax:0512-63208127