Lab fume hood

Specification

1.Casework: 1.2mm thickness of cold-rolled steel plate, after acid washing, phosphide andelectrophoresis, sprayed with good quality anti-corrosion static coating.

2.Inside Lining: 4mm thickness of Compact.

3.Worktop: 12.7mm Wilsonart Chemsurf chemical-resistant laminate, install with a hurdle to prevent spillage of liquid.

4.Sash: 6mm of tempered glass.

5.Sash Handle: 2mm Cold-rolled steel powered with epoxy coating.

6.Illumination: with not less than 300 Lux 30W fluorescent lamp set.

7.Cupsink: Oval shaped PP Cupsink

8.Water Tap: Molded in one piece copper water tap, epoxy powder coating surface with a ceramic valve.

9.Exhausting Duct: Anti-corrosion Fiberglass duct.

10.Plinth: With 1.5mm thickness of cold-rolled steel plate, after acid washing, phosphide and “dian yong”, sprayed with good quality anti-corrosion static coating.

11.Technical specification: Noise: less than 60db (International standard)

Face velocity: 0.5m/s

12.Function: With an intelligent automatic delay protection device to exhaust residual corrosion air completely and prolong the service time of fume cupboard.

relate  photo

Company and workshop

Client

All of us welcome you to visit our factory !!