3 axis cnc controller
USD $620 - $750 /Set
Min.Order:1 Set
Jinan Tian Jiao Machinery Manufacture Co., Ltd.
3 axis cnc controller
Introduction
Applicable to CNC routers, engraving and milling machines, glass cutting machines, waterjet
cutting machines and dispensers, etc; capable of external connection with 3 stepping or servo
motors to realize high-speed and high-precision motion control; more stable with better
anti-interference performance due to control signal adopting differential signal input output;
holding such features as lightening protection, anti-strong electromagnetic interference, stability and reliability; with power failure protection function.
With the corresponding software, such functions are available as linear interpolation, circular
interpolation, intelligent look ahead, reverse cutting, backlash compensation, breakpoint memory and block skip, etc.
Characterristics
Control Card Characteristics
Model Characteristic | PM53B/53C | PM63A |
Pulse Frequency | 160KHz | 160KHz |
Max. Processing Speed | 96m/s | 96m/s |
Control Mode Type | Position Control | Position Control |
Position Signal Type | Differential Signal | Differential Signal |
Control Signal Type | Pulse + Direction | Pulse + Direction |
Encoder Zero Signal | / | Available |
Servo Driver Enabled Signal | / | Available |
Servo Driver Alarm Signal | / | Available |
Number of Axes Controlled | 3 Axes, 2 Synchronized Axes, 3 Synchronized Axes | 3 Axes, 2 Synchronized Axes, 3 Synchronized Axes |
Rotary Axis | Y as Rotary Axis | Y as Rotary Axis |
PCI Slot Power Supply | Available | Available |
Equipped Terminal Board | 6B-EX1D7 | 6A-EX6B2 (Double Y Axes Waterjet Cutting) EX2A1 (Single Y Axis Waterjet Cutting) 6A-EX7A6 (Router) EX1A1 (Double Z Axes Router) EX9 (Dispenser) |
Time Lock Function | Available | Available |
Terminal Board Characteristics
Model Characteristic | PM53B/53C | PM63A | ||||
6B-EX1D7 | EX2A3 | 6A-EX6B2 | EX1A1 | EX7A6 | EX9 | |
Pulse + Direction Interface | √ | √ | √ | √ | √ | √ |
Start/Stop Input Point | √ | √ | √ | √ | √ | √ |
E-stop Input Point | √ | √ | √ | √ | √ | √ |
Mechanical Origin | √ | √ | √ | √ | √ | √ |
Analog Output (0~10V) | √ | √ | √ | √ | √ | √ |
Double Y Axes Drive | × | × | √ | × | × | × |
Double Z Axes Function | × | × | × | √ | × | × |
Tool Presetting Input Point | √ | √ | √ | √ | √ | √ |
Lubrication Output | √ | √ | √ | √ | √ | √ |
Bicolor Signal Light | √ | √ | × | × | × | × |
Tricolor Signal Light | × | √ | √ | √ | √ | √ |
Cooling Output | √ | √ | √ | × | √ | √ |
5V DC Power Output | √ | √ | √ | √ | √ | √ |
Spindle Alarm Input Point | × | × | × | √ | √ | × |
Stroke Limit Point of 3 Axes | × | √ | √ | √ | √ | √ |
Spindle Override Signal Point | × | × | × | √ | √ | × |
Z Axis Brake Output | × | √ | √ | √ | √ | √ |
I/O Terminal Board Power Supply | 24V | 24V | 24V | 24V | 24V | 24V |
Output Mode | Optical-coupler Output | Relay Output | Relay Output | Relay Output | Relay Output | Relay Output |
Input Ports | 7 | 27 | × | 17 | × | × |
Output Ports | 6 | 14 | × | 12 | × | × |
Configuration:
PM53C, equipped with terminal board 6B-EX1D7, is applied to CNC engraving and milling machines.
Accessories:
Connection Cables
Terminal Board
Photos: