Specifications

Portable CNC Laser Engraving Machine Eastern/Laser Engraver
Whole Steel Structure
Imported linear square orbit
CE Fac

Portable CNC  Laser Engraving Machine Eastern/Laser Engraver  

 

Application:

stainless steel, carbon steel and other metal materials precise cutting, suitable for aerospace technology, roket, plane, robot, elevator, steamship and automobile manufacturing and metal parts processing indudtry for metal plate, advertisement, kitchen ware, bit tool, hardware etc.

Main parts:

Features:

1. Reasonable Gantry Structure, stable laser path.

1)This Laser Cutting machine adopts Gantry Structure, cast Cross Beam, the whole

structure is very firm, and it changes the old Cantilever formation, has smaller body,

lighter weight, durable structure and high precision.

2)Laser device of this laser cutting machine includes two assemblies: mechanical

following cutting head and laser device path. Laser Path of mechanical following head and

laser device is a whole independence laser path system. This laser path system uses Germany

technology design and has stable path, high efficiency. Laser Path of Gantry is more stable

than that of cantilever.

 

2. Mechanical Following laser cutting head imported from USA, has high sensitivity and good stability.

This laser cutting machine uses USA imported mechanical following cutting head. Cutting 

head laser nozzle locking ring touch the metal sheet materials surface, cutting head move up

and down, and it can achieve same focal cutting. The cutting head has high sensitivity,

stable running and good reliability. When cutting metal sheet, there is no obvious sparks

flying phenomenon, and avoids the lower sensitivity and failure caused by air dielectric

changing and electromagnetic field interference which affect working piece cutting quality

and cutting head collision damage. (Traditional ranging cutting head can not avoid this).

This mechanical following system adopts USA advanced equipment which can ensure stability

and sensitivity.

 

3. Power supply controlled by control cabinet, easy to operate.

Control cabinet a unique design, including the entire operating system, change the past,

independent power operation of complex design, and can control the system on the current,

frequency, pulse width and other parameters.

4. Precise and rational design, optical adjustment for easy lamp and rod replacement.

The laser cutting machine make use of cantilever structure therefore just move

beam body to nailbed edge during adjustment of laser path, the operator can replace the

side lights and rods behind the beam body

 

5. Japanese Panasonic servo motor to improve the cutting speed and stability.

XY axes with two 1500W Panasonic servo motor, the moving parts of Z-axis equipped with a 200W Panasonic servo motor, the three combination ensure the stability and efficiency.

 

6. The combine of high precision ballscrews drive system and advanced feed system.

The movement system adopt the drive system of high precision ballscrews and servo motor, and this assure the high precision of the cutting. Serrate platform and trim strip are very

suitable for cutting metal sheets. The user can put in and take out the materials faster and

easily. There is a feeding shaft on the serrate platform, this special worktable can meet special

requirements, enlarge the application of this machine, and operate more easily.

 

7. High power and big refrigerating capacity water chiller.

This water chiller adopt high power 5P water chiller, and it can cool the laser system

continuately, adjust the temperature automatically, ensure working for a long time. The

temperature of the water can be kept within plus-minus 5 degree. The constant temperature of water can keep the the laser power stable, work more steady and fast.

Advantages:

1. High precision in cutting, excellent in stability.

Adopting the high precision ball screw intransmission system. The optimized CNC control

system, which can meet the processing demand in high precision accessory.Themotatio

systemis excellent, that suit for the long hours constantly working

 

2. High quality in cutting edge.

Adopting the U.S.A imported follow-up cutting head system with high sensitivity and

stability. The cutting head moving with the vary of the plate. The cut-off point

position willremain unchanged. The kerf is flat and smooth enough no need to handle it

again. Meanwhile, the machine can be use to cut both of the flat materials and curving

materials.

 

3. Cutting large format and suitable for cutting more material.

The machine can cut metal sheet within the thickness of 8mm and not larger than the size of

1500mm*3000mm. We could make the size as your requirment. The applicable materials include: ordinary carbon steel, stainless steel, Alloy steel, Aluminum, copper, titanium plate etc.

4. With drawer to collect the garbage,easy to change the gas valve.

 

5. High performance-price ratio.

For thin sheet it could instead of CO2 laser cutting machine, CNC punch press and

shears etc. But the cost of the whole machine is equivalent of CO2 laser machine 1/4, CNC

punch press 1/2. We assure that with the normal cost you could get the cutting precision

near fiber laser, exceed the axial flow laser cutting quality. TJ-500W with low cost while

high efficiency will be your best choice.

6. Low cost for using.

It adopts YAG solid laser equipment, the main consumables is electricity, cooling water,

auxiliary gas and laser lamp. The average cost is 4 dollars every hours.

7. Higher cutting speed and efficiency.

The largest speed for cutting carbon steel with this machine is 2m/min., ccording to

average speed 1m/min, 1.2 U.S. dollars per meter and except for auxiliary processing time,

it could create the value of 58.56 U.S. dollars per hour averagely, net profit up to around

51.24 U.S. dollars. With the resonable cost, get the higher profit, we assure the

performance will be the same with USA or Germany equipment.

8. Low fees for the future maintain.

This laser machine with simple structure, is easy to operate with high stability.

Standard Technical parameters:

1	Model	YAG-500W-1530
2	Laser wavelength	1064nm
3	Laser pulse frequency	0.1 - 500Hz
4	Width of pulse	0.2 - 20ms
5	Working current	100 - 400 A
6	Laser rated power	500W
7	Laser power source	18kw
8	Chiller	5KW
9	Working size	1500*3000*50mm
10	Processing precision	0.05mm/m
11	Repositioning precision	0.05mm/m
12	Min line width	0.2mm
13	Located apparatus	Red light direction
14	Way of air protection	Coaxial
15	Suitable file format	dxf, ai, plt
16	Driving way	Japanese servo motors
17	Continuous working time	24h
18	Max cutting thickness   (Carbon steel)	8mm
19	General power	12-20KW
20	Electrical source voltage	380V±10%/50Hz/100A
21	Spare parts	Xe lamp, water, auxiliary gas(N2, O2)
22	Grade of laser	Class IV
23	Packaging size	Machine:450*248*155cm   Control box:140*140*150cm   Chiller:130*120*150cm

 

samples

Warranty and after sales service

• One year machine warranty ,during the warranty period , if any parts broken, we change a new part for you freely.
• All machines are debugged before shipment.
• Lifetime technical support  and service.
• 24 hours on line or phone or by email technical support.
• We offer detailed machine manual, software manual, controller manual.
• Our factory make a vivid traing CD.
• Maintenance  free of charge during lifespan.
• Free training course at our plant.
• Welcome to visit our factory, learn machine face to face.

Company information

 

Jinan Tian Jiao Machinery Manufacture Co., Ltd. specializes in developing and manufacturing Mechanical CNC routers, CNC Laser machines, Plasma cutting machines, cutting plotters and other machines. We provide global market with high quality CNC equipment. We are a leading company in this field, being confident in offering the best service and best quality.

 

With many years' hard work and perfect management system, we have classified our products into several categories: woodworking machines, advertising machines, ATC machines, stone working machines, plasma cutting machines, laser machines and plotters. We can also customize products and offer OEM service. Our products have been exported to many overseas countries, gaining good comments.

 

We hope to be your good, long-term and honest partner. Wish you can get joy and satisfaction from our products and service.

 

Why choose TIANJIAO product? 
1. Jinan Tian Jiao Machinery Manufacture Co., Ltd. company is specialized in manufacturing and selling CNC Router and laser machine for many years . We have lots of experience.
2.Our worker have experience,they can produce machines professional and skilled,so make the machine with high quality and can work well.
3.All the parts of our machines are famous brand in China or in international,so it make sure our machine have high quality and long lifetime.
4.Perfect after-sales service.

 

Contact way:
Skype: 915
Website:
Phone:0086-18765808586