Dutch wire mesh has different Wire Diameter and mesh count. It can achieve the good filter density that square wire mesh can’t be achieved after reasonable collocation. So the Dutch wire mesh is fine wire mesh filter. The line wire is greater than weft wire in general.
Contrast type weave is called contrast because the weft wire is thicker than the line wire. (Dutch wire mesh reached the good filter accuracy that the general stainless steel mesh is impossible.)
Application: Used in precision pressure filters, fuel filters, vacuum filter, also apply to in aerospace, petroleum, chemical industry, chemical fiber, rubber tire manufacturing, metallurgy, medicine, food and other industries.
Specification of mesh count and aperture
Plain weave Dutch wire mesh | ||||
Model | mesh count(line wire X weft wire) | wire diameter (line wire X weft wire) | aperture (um) | KG/m2 |
32# | 8 x 62 | 0.63mm x 0.45mm | 300 | 5.42 |
40# | 10 x 79 | 0.50mm x 0.355mm | 250 | 3.16 |
48# | 12 x 64 | 0.58mm x 0.40mm | 280 | 2.9 |
55# | 14 x 88 | 0.40mm x 0.30mm | 180 | 2.54 |
76# | 19 x 140 | 0.315mm x 0.20mm | 140 | 1.88 |
80# | 20 x 300 | 0.35mm x 0.20mm | - | 3.6 |
95# | 24 x 110 | 0.355mm x 0.25mm | 120 | 2.45 |
100# | 25 x 140 | 0.28mm x 0.20mm | 100 | 1.95 |
120# | 30 x 150 | 0.25mm x 0.18mm | 80 | 1.68 |
140# | 35 x 175 | 0.224mm x 0.16mm | 71 | 1.52 |
160# | 40 x 200 | 0.20mm x 0.14mm | 60 | 1.40 |
180# | 45 x 250 | 0.16mm x 0.112mm | 56 | 1.09 |
200# | 50 x 250 | 0.14mm x 0.11mm | 53 | 1.04 |
220# | 55.5 x 280 | 0.14mm x 0.10mm | 50 | 0.92 |
240# | 65 x 330 | 0.11mm x 0.08mm | 36 | 0.71 |
280#(1) | 70 x 350 | 0.11mm x 0.08mm | 35 | 0.72 |
280#(2) | 70 x 385 | 0.11mm x 0.07mm | 32 | 0.75 |
300# | 78 x 700 | 0.11mm x 0.08mm | 30 | 1.39 |
315#(1) | 80 x 400 | 0.10mm x 0.065mm | 40 | 0.62 |
315#(2) | 80 x 600 | 0.10mm x 0.06mm | - | 0.74 |
315#(3) | 80 x 800 | 0.15mm x 0.04mm | - | 0.77 |
320# | 81 x 780 | 0.10mm x 0.07mm | 30 | 1.22 |
354# | 90 x 550 | 0.12mm x 0.05 | - | 0.667 |
Width :1-1.6m | ||||
| ||||
| ||||
twill weave Dutch wire mesh | ||||
model | mesh count(line wire X weft wire) | wire diameter (line wire X weft wire) | aperture (um) | KG/m2 |
360# | 91 x 787 | 0.10mm x 0.07 | 25 | 1.24 |
400# | 101 x 900 | 0.10mm x 0.063 | 20 | 1.22 |
472# | 120 x 400 | 0.10mm x 0.075 | - | 0.862 |
500# | 127 x 1100 | 0.07mm x 0.05 | 17 | 0.81 |
630# | 160 x 1500 | 0.063mm x 0.04 | 15 | 0.62 |
650#(1) | 165 x 400 | 0.071mm x 0.06 | - | 0.56 |
650#(2) | 165 x 600 | 0.071mm x 0.05 | - | 0.575 |
650#(3) | 165 x 800 | 0.071mm x 0.05 | 25 | 0.7 |
650#(4) | 165 x 1100 | 0.071mm x 0.045 | - | 0.756 |
650#(5) | 165 x 1400 | 0.071mm x 0.04 | 16 | 0.76 |
685# | 174 x 1700 | 0.063mm x 0.032 | 13 | 0.61 |
787#(1) | 200 x 600 | 0.071mm x 0.06 | - | 0.792 |
787#(2) | 200 x 800 | 0.071mm x 0.06 | - | 0.972 |
787#(3) | 200 x 1400 | 0.071mm x 0.04 | 12 | 0.8 |
795# | 202 x 1760 | 0.05mm x 0.032 | 10 | 0.6 |
850# | 216 x 1860 | 0.045mm x 0.030 | 9 | 0.518 |
1000# | 254 x 2000 | 0.04mm x 0.028 | 8 | 0.5 |
1125# | 285 x 2235 | 0.036mm x 0.025 | 7 | 0.439 |
1228# | 312 x 2100 | 0.035mm x 0.025 | - | 0.423 |
1250# | 318 x 2235 | 0.036mm x 0.025 | - | 0.449 |
1280# | 325 x 2300 | 0.035mm x 0.025 | 5 | 0.45 |
1575# | 400 x 3100 | 0.035mm x 0.019 | 3 | 0.369 |
width: 1-1.6m | ||||
