5 years warranty Non-pressure solar collector manifold for hotel ,school ,comercial hot water heating project
USD $100 - $400 /Set
Min.Order:3 Sets
Haining Chaoda Solar Collector Tubes Co., Ltd.
5 years warranty Non-pressure solar collector manifold for hotel ,school ,comercial hot water heating project
1. What is the advantage of non pressure solar collector ?
Compared with pressure heat pipe solar collector , the non pressure solar collector is much less expensive than that . because it is made up by solar glass vacuum tubes and water will go through the vacuum tubes .
Non pressure solar collector are widely used in solar hot water comercial project ,such as for hotel , school or factory central hot water supplying system .
2. working principle of non pressure solar collector
The non pressure solar collector works same way as the non pressure solar water heater . water go through vacuum tubes ,and vacuum tubes will heat the water and hot water go to top and cold water go down . the hot water will go out from the manifold .
3. the sturcture of non pressure solar collector
The non pressure solar collector include 3 parts . solar vacuum tube , manifold and stand bracket support .
There are two type of soalr collector ,one type is vertical type (one side open manifold ) ,and another type is horizontal type (both side open manifold for vacuum tubes )
4. Models of non pressure solar collector
non-pressure solar collector | |||||||
Model | Aperture area(m2) | tube installation | vacuum tube | packing volume(m³) | gross wet | ||
dia(mm) | length(mm) | qty | |||||
CDNC58-1800-15 | 1.421 | horizontal | 58 | 1800 | 15 | 0.23 | 48.1 |
CDNC58-1800-20 | 1.894 | horizontal | 58 | 1800 | 20 | 0.33 | 64.1 |
CDNC58-1800-25 | 2.369 | horizontal | 58 | 1800 | 25 | 0.38 | 79.5 |
CDNC58-1800-30 | 2.842 | horizontal | 58 | 1800 | 30 | 0.42 | 96.2 |
CDNC58-1800-40 | 3.788 | vertical | 58 | 1800 | 40 | 0.66 | 130 |
CDNC58-1800-50 | 4.738 | vertical | 58 | 1800 | 50 | 0.76 | 150 |
CDNC58-1800-60 | 5.684 | vertical | 58 | 1800 | 60 | 0.84 | 196 |
5. Specifications of non pressure solar collector
Details of non pressure solar collector | ||
Manifold | Inner manifold | SUS304/2B 0.45 mm thickenss |
Outer manifold | Sus201 or gavalized steel | |
Insulation | Polyurethane(PU), K = 97% ,40kgs/m | |
Water inlet and outlet | SUS304/2B Stainless steel, 3/4’’ | |
bracket | glavanized coating steel/stainless steel with thickness 1.5mm, angle 25°/38°/45°/50° | |
Bolts and nuts | stainless steel | |
Vacuum tubes | 58*1800 mm three layer solar vacuum tubes |
Stock :
Packing and Delivery :
About our factory :
Customer visit :
Testing Quality :
Certificate :
TERMS AND CONDITION: