CE and ISO Certified Heat Pipe Pressure Solar water heater
Negotiable /Set
Min.Order:10 Sets
Haining Chaoda Solar Collector Tubes Co., Ltd.
CE and ISO Certified Heat Pipe Pressure Solar Water Heater
Features:
1. Heat Pipe Pressure Solar Water Heaters have many new features. The technologyies of production have been continuously improved and updated in our company. And the solar water heaters are easy installed and strenthen resistance of frost cracking and hailstone.
2. The absorbing percentage of heat pipes is more than 96%. In the sunny days of spring or autumn, each collecting tube could make the water up to 90 degrees centigrade only in 2.5 hours.
3. The water tank uses enamel as internal bladder and polyurethane integral foaming as heat preservation material to improve the heat preservation ability. And it makes the system be used as usual under minus 30 degrees centigrade.
4. The high corrosion-resistant and good heat preservation PPR pipe is used as the system's pipe, so it adds the good efficiency and long service of the system.
Working principles:
1. When the temperature of the compact Solar Water Heater heat collector reaches the set value, the controller will make shall the circulation pump work automatically.
2. The circulation pump makes heat-conducting liquid circulate automatically.
3. The heat-conducting liquid transfers heat to water by the heat exchanger in the tank.
4. In case the temperature of the circulation pump does not reach the set value, the circulation pump will be shut automatically.
5. In case the temperature of the tank does not reach TM ax, then start the auxiliary heating device
(the following diagram:)
Specifications:
1. Vacuum tube: 58/1800mm heat pipe solar vacuum tube
2. Copper header inside: 0.8mm thick red copper header inside
3. Outer shell: 1.6 mm thick aluminum alloy outer shell
4. Insulation layer: 35mm thick polyurethane foam insulation
5. Bracket: 45 degree 1.5 mm thick galvanized sheet steel
6. Size: 120mm*115mm
7. Application: household solar hot heater
Advantages:
1. More high efficiency and less heat loss
2. Heat pipe solar vacuum tube
3. Use copper pipe for transfer hot, more high efficient, and water more clear,because no water in tube so can work in bad weather condition
4. Popular market: USA, Europe,Canada, Russia, Australia,New Zealand,and etc