Product Details

Product Details

ITEM	SPECIFICATION
Pixel Pitch	P6
LED per pixel	1R1G1B
Resolution	27777 pixle/sq m (uniformly spread over the surface, to ensure homogeneity)
Module Dimension(W*H)	192mm*96mm
Module Graphic Definition	32*16 pixel
Constant Color Range	16millions colors(no degradation at low brightness levels)
Refresh Rate	>300HZ
Best View Distancing	>3m
Vertical Viewing Angle	70°
Horizontal Viewing Angle	110°
Brightness	>3500cd per sq m
Brightness Adjustment	Manual, 256 level; Auto, 8 levels
Screen Power Consumption	Max: 0.8 kw/sq m ; average:0.26 kw/sqm
Way of Drive	1/8 scanning
Grey Scale	16,384 Shades Per Color
Temperature Checkup	16 Sensors/Module (to avoid over-heating and constantly preserve your investment
LED's Lifetime	up to 100,000 Hours
Input Voltage	AC110V/230V/380V±10%
Input Power Frequency	50/60Hz
Frame Rate	> 60 Hz
Defect Rate	≤0.0002
Operating Temperature	–20°C~+70°C 10%~95%RH
Control Method	Synchronized with computer monitor or other input system
MTBF	> 10000 hours
Color Temperature	6500K±500
Color	In each pixel, there are 256 level gray for red, green and blue representative, and 16777216 colors in total.
Support Mode	VGA, 1024*768 display syn-chronically with the computer, correspondence dot to dot
Control Distance	100 m (no repeating); Optical fiber transmission: 500m- 10km
Systems Operating Platform	WINDOWS(WIN2000, WINXP), with a friendly UI, and interfaces for secondary development.

Product show

Our factory

Display box

Out packing

Our service

1.Your inquiry related to our products or price will be replied in 24hrs.

2.OEM&ODM,any your customized lightings we can help you to design and put into product.

3.Distributoership are offered for your unique design and some our current models

4.Protection of your sales area,ideas of design and all your private information

5.Top Quality+Reasonable Price+Responsible After Service=Successful & Win

6. Export countries : Peru, Mexico, Colombia, Turkey, US, UK, etc.

FAQ

Usage Considerations of LED Display

1.Switching sequence

1) screen switching sequence: on: first turn on the computer, then screen off: first shut off screen, then computer.

2) Interval of switching LED display must be greater than 1 minute.

2. Ambient temperature

When ambient temperature is too high or cooling condition is bad, users had better not to turn on the screen for a long time.

Screen shall be installed in temperature from-10 °C to 40 °C.Over environment temperature range, temperature control equipment must be installed.It is forbidden to install LED display near any heat source.

3.Ambient humidity

When installing screen, ambient relative humidity should be in the range from 30% to 70%.It is prone to get static electricity when the indoor humidity is below 30%; when the indoor humidity is higher than 70%, electronic components are easy to get damp.

4.Corrosive gas environment

Please do not install the display in corrosive gas environment containing acid or base components, such as chemical warehouse.

5. Electromagnetic radiation environment

Please do not install display when electromagnetic radiation and radio frequency radiation environment is over field strength 5V/m.

If necessary, isolation treatment should be taken.

6.Steady power supply

If necessary, users have to install surge switches in the distribution box and ground fault protection to avoid lightning strikes.

Do not use the display in strong lightning and other severe weather.

7. Conductive material is strictly prohibited to contact display, such as metal dust and water.

Screens are placed in the environment of low dust as far as possible, otherwise it will affect the display effects, as well as damage the circuit.If exposed to water for various reasons, please immediately power down until the screen unit dry.

8.Controlling colors

Do not display a long time in a white, red, green, blue or other bright screen, because this will affect the display lifetime.

9.Controlling time

LED display at least rest 2 hours a day. Normally turn on the screen at least twice a week or more (Especially in the rainy season it is necessary to turn on the display every day).And it maintains more than 2 hours every time.

10.Regular overhaul

LED display requires regular inspection to check circuit damage. If it does not work, change it in time. If circuit damages, it should be repaired or replaced.

11.Security alerts

Users must ensure safety while installing Led display. The factory only offers products and reference programs of frame fixation.

Users can ask relevant authorities to confirm according to local conditions and field conditions.

If you are interested in our products, welcome to your inquiry ,please contact me:

Skype:Wanting Chen

Thank you very much!