Specifications

Laser marking machine for metal parts
1.Mark on metal, plastic flat & cambered surface
2.CE approved
3. Continuous work on 24

Laser marking machine for metal parts

Sample

 

 

Technical parameters

Input voltage:	AC220V±20V
Frequency:	50Hz
Input power:	1.5kVA
Wavelength:	1.064µm
Power:	50W
Instability:	±5%
Radio-frequency power:	≤50W
Modulating frequency power:	200Hz~50kHz
Pulse duration modulation:	4µs~25µs
Working area:	110mmx110mm
Scanning speed	0~7000mm/s
Marking depth:	0.01~0.2mm (according to material)
Marking width:	0.1-0.2mm (according to material)
XY table working area:	85mm x 85mm
Laser head lifting height:	200mm
Cooling way:	Refrigeration unit cools the circulating media then the circulating media cools the laser cavity.
Refrigerating power:	1P
Refrigeration unit:	De-ionized water, distilled water or purified water.

·Feature:

 

1.       Diode pumped laser marking machine adopts high-quality semi-conductor module, life time over 10k hours.

2.      Fast speed & no touch processing, the heat exchange is little, the material is not easy to distort.

3.      Can quickly mark letter, figure, graphics or auto-coding, serial No., batch No., barcode, 2 -D code, etc. on metal or nonmetal surface (plastic, silicon or porcelain, etc.) which are precise, permanent, non-polluting and environment-friendly. 

4.      Its mainly equipped with the international advanced semiconductor light-emitting diode. diode laser module, scanner head, beam expander, reflect lens, Q-switch, Q-driver and other key parts imported from USA,UK, Singapore etc. 

 

·Main application field: Hardware, IC, instrumentation, electronics,machinery industry, jewelry, glasses, auto parts, telecommunications products, plastic buttons etc.