CL150-1800-5ply production line

Steam heating

Standard configuration and quotation

Distinguishing feature:

Main Technology Parameters:

n  Model  CL150-1800

n  Total length  About 75 meters  (depend on base drawing)

n  Design speed  150 m/min

n  Working speed  100-120 m/min for 3-ply, 80-100 m/min for 5-ply

n  Effective width  800-1800mm

n  Steam pressure and consumption
Pressure 1.4 - 1.6MP    Consumption about 2500-3000kg/h

n  Air pressure and consumption
Pressure0.8 - 1.0 MPa    consumption about: 1.5 m³/min

n  Slitting precision:±1mm(manual)

n  Cutting length and precision  500 - 9999mm,  ±1mm

n  Dimension  about 75m×8m× 5m (L×W×H)

n  Equipment flow: according the customers’ workshop to installation the machine

Note: Test basis paper for production line should meet follow requirements;

n  Machine surface temperature: not less than 172℃

n  Basis paper scale ≥B  

n  Basis paper moisture: 11%±1%

liner: 150 - 200 g/m2; medium paper: 150 - 200 g/m2;

corrugated paper: 105 - 180 g/m2

Note: some parts equipped by consumers

n  Heating system: one set steam boiler that rate capacity is 4000kg/h, rated pressure 1.25Mpa

n  Steam pipe (Dia.114mm) and air return-air drainage duct (Dia.89mm).

n  Compressored air tupe, glue pipe, steam pipe and air return pipe

n  Water, electricity, gas installation ground work.

n  Equipment machine grease, lubrication oil, engine oil.

n  Test basis paper, corn(potatoes)starch, caustic soda for industrial use, Borax and other material