Home use smart switch Z-wave Appliance module, home automation
USD $18.25 - $32.57 /Piece
Min.Order:1 Piece
Dongguan NIE Technology Co., Ltd.
Introduction
This is an enabled Z-wave ON/OFF Module, which have repeater function and fully compatitble with any Z-wave enabled network.
Technical data
Installation
1.Plug this ON/OFF Module into a wall outlet near the load to be controlled.
2.Plug the load in to the Module. Make sure the load to be controlled cannot exceed 2990/3500 watts.
3.Turn the knob or switch on the load to the ON position.
4.To manually turn ON the ON/OFF Module, press and release the ON/OFF knob.The blue indicator LED will turn ON , and the load plugged into the module will also turn ON.
5.To manually turn OFF the Module, simply press and release the ON/OFF knob.The blue indicator LED will turn OFF and the load plugged into the Module will also turn OFF.
Safety and maintenance instruction
Maintenance
The devices are maintenance-free, so never open them. The guarantee becomes void when you open the appliance. Only clean the outside of the devices with a soft, dry cloth or a brush. Prior to cleaning, remove the devices from all voltage sources.
NOTE!
Do not use any carboxylic cleaning agents or petrol, alcohol or similar. These will attack the surface of devices. Besides, the vapors are hazardous to your health and explosive. Do not use any sharp edged tools, screw drivers, metal brushes or similar for cleaning.
Warranty 1 year