Introduction

This is an enabled Z-wave ON/OFF Module, which have repeater function and fully compatitble with any Z-wave enabled network.  

Technical data  

• Operating Voltage:230V/50Hz
• Maximum Load:3000W
• Range:Min 30m line of sight
• Dimensions: 102(L)*60(W)*49(H) MM
• Net weight: 120g
• Kinds of socket type: Germany/France/UK/HK/Australia/China
• Frequency:868.4MHz/865.4MHz/921.2 MHz/869.0MHz

Installation

• 1.Plug this ON/OFF Module into a wall outlet near the load to be controlled.
• 2.Plug the load in to the Module. Make sure the load to be controlled cannot exceed 2990/3500 watts.
• 3.Turn the knob or switch on the load to the ON position.
• 4.To manually turn ON the ON/OFF Module, press and release the ON/OFF knob.
• The blue indicator LED will turn ON , and the load plugged into the module will also turn ON.
• 5.To manually turn OFF the Module, simply press and release the ON/OFF knob.
• The blue indicator LED will turn OFF and the load plugged into the Module will also turn OFF.