Product Details

Stainless Steel Angle Bar AISI SUS EN GB SGS JIS 304 316L ,

1.Finish : Black,peeled,Polished,bright,hair line,brush,sand blast,etc

2.Outside Diameter: from 1mm to 400mm

3.Main Material: Grade : 304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 S33, 316L, 317, 317L, 321, 347, 347H, 409, 410, 410S, 420, 430and so on

4.Main Standards: ASTMA276,ASTMA312,ASTMA213,GB/T14975-2002,GB/T14976- 2002,GB/T13296-91,JIS

5. Processing methods: Cold Drawn & Hot Rolled & Forged

6.Packing: Standard export package,suit for all kinds of transport, or as required

7.Payment:by Ex-Work,FOB,CNF,CFR,CIF,FCA,DDP,DDU,et

8.Shipment:5-15 days after receipt of the down payment or Irrevocable L/C sight.

9.Mill Test Certificate is supplied with shipment,Third Part Inspection is acceptable.

10.Minimum order quantity:0.5 ton

11.Certificate:ISO,SGS,TUV and Third part inspection.

12.Capacity:2000 ton per month

13.Application: Stainless steel bar applies to petroleum,chemical industry,electric power,boiler,high temperature resistant,low temperature resistant,corrosion resistant seamless steel pipe used.Stainless steel

Feel free to contact us if you have any other special requirements,we assure of our best attention all the time.

Dia(Ø)	1mm to 400mm
Length	1 mtrs to 8 mtrs
Standards	ASTM a276/479,Astm a182, Sb462, sS166, Sb564, Sb446, Sb408, Sb425, A516, A387, en -24, en8, DIN, JIS, ASME,gb
*Stainless Steel round bars Grades*	304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 S33, 316L, 317, 317L, 321, 347, 347H, 409, 410, 410S, 420, 430
*Carbon and alloy steel*	17-4ph(630gr), En24, En8, Is 2062 gr. A, gr. B, En 9,En 19. En 24, En 31
*Duplex Steel round bars Grades*	Duplex F51 2205 UNS S31803, Super Duplex 2507 (UNS S32750), F55 (UNS S32760)
*Monel round bars*	UNS 4400 (Monel 400), Monel 500
*Inconel round bars*	UNS 6600 (Inconel 600), UNS 6601 (Inconel 601), UNS 6625 (Inconel 625), Incolloy 800, UNS 8825 INCONEL (Incolloy 825)
*Others round bars Grades*	ASTM / ASME SB 564 UNS 2200 ( NICKEL 200 ) Hastelloy 904, NICKEL 200

Tolerance	h7	h8	h9	h10	h11	f7	f8
OD mm	h7	h8	h9	h10	h11	f7	f8
6-10	0-0.015	0-0.022	0-0.036	0-0.058	0-0.09	-0.013 -0.028	-0.013 -0.035
10-18	0-0.018	0-0.027	0-0.043	0-0.058	0-0.09	-0.016 -0.034	-0.016 -0.043
18-30	0-0.021	0-0.033	0-0.052	0-0.084	0-0.13	-0.02 -0.041	-0.02 -0.053
30-50	0-0.025	0-0.039	0-0.062	0-0.1	0-0.16	-0.025 -0.05	-0.025 -0.064
50-80	0-0.030	0-0.046	0-0.074	0-0.12	0-0.19	-0.03 -0.06	-0.03 -0.076
80-120	0-0.035	0-0.054	0-0.087	0-0.14	0-0.22	-0.036 -0.071	-0.036 -0.9