KL-280 Single Fiber Optic Fusion Splicer
USD $3,650 - $3,850 /Set
Min.Order:1 Set
Shenzhen Neofibo Technology Limited
Model | KL-280 |
Applicable fibers | SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655) |
Fiber cleaved length | 8--16mm(Coating diameter: 250um) |
16mm(Coating diameter: 250 -- 1000um) | |
Fiber diameter | Cladding diameter£º80 --150um |
Coating diameter£º100 ¨C 1000um | |
Fiber Count | Single |
Fiber aligning method | Core aligning |
Return loss | >60dB |
Actual average splice loss | 0.02dB (SM),0.01dB (MM), |
0.04dB (DS),0.04dB( NZDS) | |
Splicing mode | auto |
Splicing mode | 12(templet), 188(user) |
Typical Splicing time | Typical 9 sec,with standard SM fiber |
Protection sleeve length | 60mm, 40mm and a series of micro sleeves |
Storage of splice result | 5000 results,3 parameter per result |
Tension test | 2N |
Fiber display and magnification | 400X(X or Y view), 200X(X and Y view) |
Tube heating time | Typical 30 sec |
Electrode life | 2500 |
No.of splice/heating with battery | Typical 130 cycles (splice/tube heat) with inner Li-battery |
Display screen | 5 inch color LCD monitor |
Image change over | The fiber image is turned upside down |
Terminals | RS 232 |
Operating condition | 0 to 5000m above sea level, 0 to 95%RH and -10 to 50 centigrade ,respectively,Max. wind velocity of 15m/s |
Power supply | AC 100-240V with AC adapter; inner Li-battery(6600mAH) |
Dimensions | 150mm(L) x150mm (W) x160mm (H) |
Weight | 3.52 Kg including battery |