Main Products: Injection Molding Machine ,Blow Molding Machine
Energy Saving PET preform injection molding machine FOR 2 CAVITIES 700G/5GALLON PET PREFORMS
Negotiable /Set
Min.Order:1 Set
Quick Details View All >
Foshan Powerjet Plastic Machinery Co., Ltd.
Business Type: Manufacturer
Foshan Guangdong ChinaMain Products: Injection Molding Machine ,Blow Molding MachineProduct Details
recommended variable pump pet preform injection molding machine.
Optional Servo Motor PET preform injection molding machine.
Plate
Features:
·Specially made PET screw highly increases the plasticizing speed and shot weight, lowers the plasticizing speed and show weight, lowers the plasticizing temperature and AA value, also lowers the shearing of perform, while achieves better transparency.
·The servo motor control system can save energy by 30% ~ 50%, while the variable pump control system can save energy by 25% ~ 45%.
·Different models are available for the choice of customers.
·Increasing eject force ejector stroke, accepts PET perform molding.
·Whole closed safe door meets the requirement of sanitary and thermo-control.
·Hot runner system interface is included.
·Optional with pressure holding and charge at the same time, which can increase the output by 15% ~ 25%.
·Whole production project can be provided, including moulds, injection molding machine, PET stretch blow molding machine and auxiliary equipments.
PARAMETERS
:
| Technical Parameter of PET-2105V6 | ||
| Description | Unit | PET-2105V6 |
| HPET-2105V6 | ||
| Injection Unit | ||
| Screw Diameter | mm | 83 |
| Screw L/D Ratio | 22 | |
| Shot Volume | cm3 | 1786 |
| Shot Weight(@PS1.05) | g | 1678 |
| Shot weight(@PET1.3) | g | 2078 |
| Shot weight(@PP0.9) | g | 1438 |
| Injection Pressure | Mpa | 330 |
| Max.screw rotary speed | rpm | 109 |
| Clamping Unit | ||
| Clamping Force | KN | 4000 |
| Opening Stroke | mm | 710 |
| Max daylight: | mm | 1540 |
| Space between Bars(H*V) | mm*mm | 740x720 |
| Movable platen size(H*V) | mm*mm | 1050x1050 |
| Max. Mold Height | mm | 830 |
| Min. Mold Height | mm | 300 |
| Ejector Stoke | mm | 210 |
| Ejector Force | KN | 184 |
| Ejector-back force | KN | 115 |
| Number of ejector pins | 12+1 | |
| Power Unit | ||
| Hydraulic System Pressure | Mpa | 17.5 |
| Pump Motor Power | KW | 37 |
| Heater Power | KW | 28 |
| Total current | A | 193.6 |
| General | ||
| Oil Tank Capacity | L | 650 |
| Machine Weight | Ton | 15 |
| Machine Dimensions(L*W*H) | m*m*m | 7.2X1.65X2.3 |
| Remarks: H series can achieve press holding and material charge at the same time, suitable for the mold with better cooling system, shortening the cycle time. | ||
Contact Supplier
You May Like
New Products
Popular Searches
Recommended Products
Find Similar Products By Category
Facebook
X
Pinterest
Linkedln