Specifications

Energy saving Variable Pump or Servo Motor
Imported major components
Inject two material or double colors at the same time

1. Feature

• Using variable pump hydraulic system to lower power consumption.

• Faster response, higher repetition, better stability

• Injection molding with two materials or double colors at the same time, which can reduce the cost of the technology and the human resources.

• Very easy to set parameters and adjust hydraulic system with the digit control.

 

2. Work principle

The injection molding machine injects the first material into the mould and the plastic takes the shape. After the mould is open, the movable ratary mould platen turns around with the other work pieces by 180°then the machine makes the second injection after the injection nozzles is directed at the cavities of the mould and the mould is closed, and then finally takes shape; Or the first material injection and the second material can be done at the same time to take shape.

 

3.Parameter  

DESCRIPTION	UNIT	BJM130S5
CLAMPING UNIT
Clamping force	KN	1300
Opening stroke	mm	400
Max.daylight	mm	850
Platen size	mm×mm	1060×800
Space between Bars(H*V)	mm×mm	720×410
Max. Mold Height	mm	450
Min. Mold Height	mm	130
Ejector Stoke	mm	120
Ejector Force	KN	2×49
INJECTION UNIT		A	B
Screw Diameter	mm	26   28   30	26   28   30
Screw L/D Ratio		22.6   21 19.6	22.6   21 19.6
Injection Pressure	Mpa	234   202 155	234   202 155
Shot Volume	cm³	63   73   96	63   73   96
Shot Weight(PS)	g	60   69   90	60   69   90
	OZ	2.0   2.4   3.2	2.0   2.4   3.2
Injection rate	g/sec	64   73   84	64   73   84
Screw Stroke	mm	120	120
Screw Speed	RPM	230	230
POWER UNIT
Hydraulic system pressure	MPa	16
Pump motor power	KW	11+11
Heater power	KW	7
GENERAL
Oil tank capacity	L	210
Machine weight	Ton	6
Machine dimensions(l×w×h)	m×m×m	5×1.6×1.8