Base film: PET

Coating layer: Nontoxic resin possible metallized AL combined pigment.

(1) Appropriate hot stamping foil for fabric, gluewater and technics ought to be chosen according to the different stamped material;

(2) Much attention must be paid to the good match of temperature, speed and available gluewater.

(1) NORMAL HOT STAMPING: about 110~140 °c temperature ; Stamping speed: 15~40m/min; Heat Preservation: put the stamped material with foil into the glasshouse at 50~80°c, then seperate the foil from the stamped material after about 12 hours.

(2) SPECIAL HOT STAMPING: about 120~180 °c temperature; Stamping Speed:20~50m/minutes, no need Heat Preservation.

(1) Hot stamping foil for fabric must be protected from pressure, moisture, heat and sunshine;

(2) Storage time: 1 year