EMC brass cable gland G type
CODE. | Thread(AG) | Cable range(mm) | Thread O.D.(mm) | Thread no. per inch | Thread length GL(mm) | Joint length H(mm) | Wrench dia.(mm) |
HX-NP1/4AE | G1/4 | 6.5-3 | 13.1 | 19 | 7 | 19 | 14 |
HX-NP3/8AE | G3/8 | 8-4 | 16.6 | 19 | 8 | 19 | 18 |
HX-NP1/2AE | G1/2 | 12-6 | 20.9 | 14 | 8 | 22 | 22 |
HX-NP3/4AE | G3/4 | 18-13 | 26.4 | 14 | 9 | 25 | 30 |
HX-NP1AE | G1 | 25-18 | 33.2 | 11 | 11 | 29 | 40 |
HX-NP1-1/4AE | G1-1/4 | 33-22 | 41.9 | 11 | 13 | 35 | 50 |
HX-NP1-1/2AE | G1-1/2 | 38-32 | 47.8 | 11 | 14 | 37 | 57 |
HX-NP2AE | G2 | 44-37 | 59.6 | 11 | 14 | 38 | 65 |
HX-NP2-1/2AE | G2-1/2 | 52-42 | 75.1 | 11 | 15 | 38 | 77 |
HX-NP3AE | G3 | 70-65 | 87.8 | 11 | 15 | 48 | 94 |
Thread type: G | |||||||
Material: Brass, nickel plated | |||||||
Claw is made of PA while the sealing and sealing ring is made of NBR. | |||||||
Approvals: CE, ROHS,REACH | |||||||
Protection degree: IP68 | |||||||
Temperature Resistance:-40°C to 100°C,short time to 120°C. | |||||||
Thread length: Standard thread type is used for the equipment which has inner thread or | |||||||
for the thin board. | |||||||
Longer thread type is used for the thick board. You can ask for the longer | |||||||
thread type as your need. | |||||||
Function: EMC cable gland is designed for use with unarmoured, elastometric and plastic cable or braided cables where EMC is required. Suitable for both indoor & outdoor applications, seals on cable outer sheath to IP68, and if fitted with patented EMC membrane, suitable to carry on cable shield/braid. |