Specifications

rocker sofa recliner mechanism:
Raw and processed material: steel plate, thickness: 3-5mm, high quality material from Baosan an

 

rocker sofa recliner mechanism

PACKAGE   MATERIALWOOD
            MERS1.14×0.96×0.47M
            QTY20SETS/CTN
            G.W400KG

Raw and processed material: steel plate, thickness: 3-5mm, high quality material from Baosan and Bengxi
Paint: no contamination-no plumbum, no chromium
Number of open and fold: more than 5,000
Packing: carton or wood

 

1.The ottoman adopts the design of wide heavy gauge links and built-in articulating
   elevated mid-ottoman.Profile shape designed for  safety and appearance without
   pinch points. Articulating designs  allows use of wider & higher mid-ottoman for
   elimination of entrapment areas and for leg support
2.The system adopts the geometrically balanced  design to balance chair  operation
   It is consistent and  easy for operation by  any  person. The occupant¡¯s weight
   is used to balance operation. Meanwhile it controls the  sitting  position  and
   reclining position. Springs here are only used for locking and the initial start
   of the opening.
3.The customer has  several options as to how to  activate the mechanism.There  
   are cable style,outside handle style and inside handle style.Easy operation.
   Customer can choose to use handle or lever activation to open the mechanism 
   and the color of the handle or lever. Slight footrest  pressure will  allow closing
   the ottoman.
4.The system uses direct drive with double locks. The direct drive with double over
   -center locks enables maximum synchronization  of side positive locking  of both
   sides. Square  drive tube connects  to and controls  both left and  right sides.
    Ottoman is locked closed on both sides.
5.Minimum stack-up design.The adoption of the flatter links and wider base
   mounting points enables greater bending resistance and greater stability and
   strength. It improves  weight capacity and  durability. The mechanism base
   width is closer to seat width while maintaining  sufficient clearance  between
   links to  eliminate possibility of interference.
6.Metal rocker base assembly. The welded base assembly ensures the maximum
   strength  and  durability. THEtubular  cross  members for  maximum resistance to
   twisting and bending.Flat plastic glide allows base  to be longer for resistance
   to tipping over without  interfering with chair frame when rocking backward-more
   rock  and  shorter frames. There  are 7 base  positions  and 3 cam positions for
   balancing rock.
7.The system uses the extended life rivet joints design.All rivet joints have either
   acetal or bronze rivet bushing and acetal spacers to eliminate any steel to steel
   contact. No metal to metal noises when links contact nylon stop pins.
8.Interchangeable  on wood  frame design. The  wood frames  designed  for the
   rocker recliner, motorized lift are all interchangeable.
9.The  back  of the  chair  adopts the  KD sleeve  design  for  easy  packaging  and
   installation.