Specifications

Big Forging Furnace for Flat Steel
1.high efficiency
2.energy saving
3.easy installation and operation

Big Forging Furnace for Flat Steel

 

 1.  Application:

By diathermy machine cooperating with medium or high frequency power supply, to achieve the heating process. Commonly used in forging, casting, welding, annealing and other heat treatment process with bar, pipe, wire, sheet and various metal parts.

 

 2.  Main technical parameters:

Output Power : 20~3500KW

Output Frequency : 0.5~4KHZ

Max Using Temperature : 1250°C(nonferrous metal)

Output Voltage : 20~2000V

Workpiece Material : steel, iron, copper, aluminum ,stainless steel etc

Artifacts Quantity : single, double location, three, four or more locations

Temperature measurement: far infrared temperature measurement

 

 3.  the types of commonly used heating equipment:

1> bar, pipe diathermy equipment: section of club, the tube material diathermy before forging or stamping;

2> wire diathermy equipment: diathermy of linear materials or disk wire;

3> plank diathermy equipment: diathermy of automobile plate spring, steel plate shape materials etc;

4> special-shaped parts and local diathermy equipment: used for special-shaped parts global or local diathermy;

5> line heating equipment: diathermy materials or components with global or local heating in continuous production line,such as PC steel production line, seamless steel tube rolling production line, seamed steel pipe production line, pipe production line, cap sealing production line, etc.

6> Oversize parts diathermy equipment: used for especially big parts(big volume,heavy) diathermy, such as Marine gear, dam sluices rails ,power station motor end ring, large oil pipeline, etc.;

 

 4.Technical Parameters

Medium Frequency Diathermy Equipment
Model NO	Input power(50/60HZ)							Water consumption/hour (ton)			efficiency(T/H)
	power       KW	Input voltage   V	Current A	Direct current     A	Direct voltage   (V)	MF voltage  (V)	MF frequency   (KHZ)		Power consumption (KW/H)	Workpiece diameter (mm)
JL-KGPS--200	200	380	320	400	500	750	2-4	2-10	430	30-100	0.52
JL-KGPS--300	300	380	480	600	500	750	2-4	2-10	420	50-150	0.83
JL-KGPS--400	400	380	640	800	500	750	2-4	2-10	400	60-200	1.15
JL-KGPS--500	500	380	800	1000	500	750	1-2.5	5-15	390	70-230	1.47
JL-KGPS-600	600	380	960	1200	500	750	1-2.5	5-15	390	70-270	1.76
JL-KGPS--800	800	380	1280	1600	500	750	0.7-1	10-20	370	80-300	2.4
JL-KGPS--1200	1200	380	1920	2400	500	750	0.7-1	10-20	380		3.2
		720	1010	1260	950	1650				120-380
JL-KGPS--1500	1500	720	1263	1578	950	1200	0.5-1	15-25	360		3.7
		950	960	1200	1200	1650				120-380
JL-KGPS--2000	2000	720	1684	2105	950	1200	0.5-1	20-30	330		4.3
		950	1280	1600	1200	1650				120-380
JL-KGPS--2500	2500	720	2150	2630	950	1200	0.3-0.7	25-35	330		5
		950	1600	2000	1200	1650				120-380
JL-KGPS--3500	3500						0.2-0.5	25-35	330		5.8
		1000	1825	2280	1315	1650				120-380
temperature:1.steel 1250°C   2.iron1150°C      copper 850 °C     4.brass 650 °C    5. aluminum500 °C