Specifications

ceiling suspension t-grids
exposed flat system
fireproofing,humidity resistance
wear well t-bar

 

 

The detail information of the ceiling tee grid (T-Bar, T-grid)

1.)    Be made of hot dip galvanized steel .it is fire tightness , flame retarded,soundproof,anti-aging

2.)    The connector by unique design,when you construct the ceiling, it is easy to install and not to be losened or to be detached each part..

3.)    It is also can be removed and reused without being damaged or without the use of tools.

4.)    Its suspension holes punched on the main tee and cross tee in order to increase the durability and safety of the lay-in grid suspended ceiling system.

3) Specifications of ceiling T bar:
main tee:24x38x0.3x3600/3660mm, 24x32x0.3x3600mm/3660mm
cross tee:24x32x0.3x1200/1220mm, 24x26x0.3x1200mm/1220mm
cross tee:24x32x0.3x600/610mm, 24x26x0.3x600mm/610mm
wall angle:22x20x0.4x3000mm/22x22x0.4x3000mm

 

Installation steps:

1.)    Determine the requirment ceiling level,mark the position and fix wall angle on the wall.

2.)    Hang main tee with T-bar suspension hook.

3.)    Insert cross tee to the main tee.

4.)    Cross tee adjacent to wall angle light fittings

5.)    Adjust the levels and alignments throughout the entire grid system accurately

6.)    Install PVC gypsum ceiling tile or othermaterials ceiling panel.