Standard Configuration:

Mainframe: 1 set

Spray gun: 1set

Heating and preserved pipe: 15m

Connecting pipe for spray gun: 1.5m

Max. Pipe length: 45m

Transfer pump: 2 sets

Technical Parameter:

Power Source: 220v, 7000w

Air Source: 0.5~0.8Mpa(70~120psi) ≥0.9m3 /min

Output: 4~8kg/min

Heating device power for material: 2500w×2

Heating power for pipe heating: 2000w

Single component output pressure: 5~10Mpa (700~1500psi)

Shipping Parameter:

Weight: 130kg

Volume: 800×700×1100(mm)

Brief Introduction

JHPK-III,the high-pressure polyurethane spray and perfusion equipment. The parts of the equipment are from America making sure the pressure is enough for mixing the double component materials together. It has the separate heater which is 2500 wattprovides the reliable heat source for the row materials solving the problem of the viscosity of the materials. The pipe of heating and preserved is 15 meters and it preserves the heat energy of the materials. The system of spray gun with non-solvents washing makes the machine easy to operate, and maintain.