Name: A36 High Quality type checkered plate made in China high quality steel coil
Brand: emerson
Availability: InStock

Product Details

Product Description

High Quality Checker Plate

Factory Supply

Chemical composition & Mechanical Property

Standard	Grade	C max	Mn max	Si max	P	S	Yield strength max	Tensile strength	Elongation%
JISG3101	SS400	0.22	-	0.30	0.045	0.030	245	400-500	26
GB700	Q235B	0.14-0.22	0.30-0.65	0.30	0.045	0.030	235	375-460	21-26
ASTM	A36	0.24	-	0.40	0.045	0.030	250	400-52	26
EN10025	S235JR	0.22	1.50	---	0.045	0.045	175Mpa	340-510 Mpa	17

Thickness;	1.5mm, 1.8mm, 2mm, 2.5mm, 2.75mm, 3.0mm, 3.5mm, 3.75mm,4.0mm, 4.5mm, 4.75mm, 5.0mm, 5.5mm, 5.75mm, 7.5mm, 7.75mm,9.5mm, 9.75mm, 11.5mm, 11.75mm, 12.75mm
Width;	1250mm, 1500mm, 1800mm, can cut to any width
Length;	2440mm, 6000mm, or any length as required
Packaging:	1. by coils 2. steel coils cut to steel plates will be in bundles with 1 ton per bundle with thickness under 10mm 3. each steel coil weight usually is about 28 tons, will be cut into 2-3 small steel coils for loading at seaport
Shipping:	7 days for stock sizes and 20 days for new production sizes
Port	Tianjin China

(We also can product according to custom's requirement)

Hot rolled metals generally have little directionality in their mechanical properties and deformation induced residual stresses. However, in certain instances non-metallic inclusions will impart some directionality and workpieces less than 20 mm (0.79 in) thick often have some directional properties. Also, non-uniformed cooling will induce a lot of residual stresses, which usually occurs in shapes that have a non-uniform cross-section, such as I-beams and H-beams. While the finished product is of good quality, the surface is covered in mill scale, which is an oxide that forms at high-temperatures. It is usually removed via pickling or the smooth clean surface process, which reveals a smooth surface.^[7] Dimensional tolerances are usually 2 to 5% of the overall dimension.

Our Services

A36 High Quality type checkered plate made in China high quality steel coil

Cut large coils into small coils. For steel coils, we can cut one large steel coil into small steel coils for loading at seaport; because for container shipping, each container usually loads weight can not be over 26 tons, but each large coil is usually about 28 tons, so one large coils has to be cut into small coils, and because the forklift usually takes 7-10 tons at seaport, so for easy loading into conatiner, each large steel coil usually is cut into 3 small coils. For bulk vessel shipping, it usually demands coils weight under 18 tons, so most times, also need cut one large coil into 2 small coils.

Open flat coils into steel checkered plate. For final application, need open flat the coils and cut the coils into steel checkered plate, so we open flat the coils and cut the coils to steel checkered plate to the sizes as required. For saving cost for loading by container, load into 20 feet containers, so cut the length under 5800mm, usually as required to cut to length 2440mm and 5800mm, width usually be 1220mm and 1500mm.

after cutting the steel checkered coils into checkered plate, we can do black paints on the surface of the plate to make the checkered plate to be anti-rust.

Weight calculation method and structural picture

STEEL PLATE WEIGHT/PER PIECE(KG)= LENGTH*WIDTH*THICKNESS*7.85

Production Flow

FAQ

1. What is your minimum order quantity?

For steel plate;one piece is ok. For steel pipe;one ton is ok.

Too litter quantity,the cost relatively high added fregiht. Larger quantity, better price.

2.How long will it take to receive my order?

7 days for stock sizes, 20-25 days for new product

3.Which type of shipping do you usually choose?

Packaging

when each plate weight is under 1 ton, it will be in bundle with steel strips 2-4, when each plate weight is over 1ton, it will be piece by piece.