Q345B Factory Supply Standard Sizes steel coil
USD $469 - $520 /Ton
Min.Order:1 Ton
Tianjin Emerson Commercial And Trade Co., Ltd.
chemical composition & technical property
Q345B Factory Supply Standard Sizes steel coil
C | Si | Mn | S | P | Yield Strength Map | Tensile Strength MAp | Elongation % | |
Q345B | ≤0.2 | ≤0.5 | ≤1.7 | ≤0.035 | ≤0.035 | ≥345 | 470-630 | ≥24 |
Packaging Details:
Q345B Factory Supply Standard Sizes steel coil
1. steel checker plate are cut from coils, so some no need cut to plate, so transport by coils 2. steel coils cut to steel checker plate will be in bundles with weight under 3 ton per bundle 3. each steel checkered coil weight usually is about 28 tons, will be cut into 2-3 small steel coils for loading at seaport
Delivery Detail: 5-7 days for stock sizes, 15-20 days for new production sizes
structural picture and weight counting method:
Q345B Factory Supply Standard Sizes steel coil
STEEL PLATE WEIGHT/PER PIECE(KG)= LENGTH*WIDTH*THICKNESS*7.85
For example: the plate length is 6 meters, width 2 meters, thickness 30mm,
the weight of per plate: 6*2*30*7.85=2826kgs
Our Service
Q345B Factory Supply Standard Sizes steel coil
Cut large coils into small coils. For steel coils, we can cut one large steel coil into small steel coils for loading at seaport; because for container shipping, each container usually loads weight can not be over 26 tons, but each large coil is usually about 28 tons, so one large coils has to be cut into small coils, and because the forklift usually takes 7-10 tons at seaport, so for easy loading into conatiner, each large steel coil usually is cut into 3 small coils. For bulk vessel shipping, it usually demands coils weight under 18 tons, so most times, also need cut one large coil into 2 small coils.
Open flat coils into steel checkered plate. For final application, need open flat the coils and cut the coils into steel checkered plate, so we open flat the coils and cut the coils to steel checkered plate to the sizes as required. For saving cost for loading by container, load into 20 feet containers, so cut the length under 5800mm, usually as required to cut to length 2440mm and 5800mm, width usually be 1220mm and 1500mm.
after cutting the steel checkered coils into checkered plate, we can do black paints on the surface of the plate to make the checkered plate to be anti-rust.
Tianjin Emerson Commercial and Trade Co.,Ltd mainly provides steel plate, steel sheet, steel pipe,seamless steel pipe and tube, round bars and steel section, and doing steel products processing service: steel plate and sheet processing service. The processing works concludes cutting the larger plate into the small sizes customer demand, cut by drawing, cut to special sizes, weld the cut parts by drawing, also make galvanizing processing or surface painting on the final processed parts; steel pipe hollow bar cutting and lathe processing to make the outer diameter and wall thickness to meet customers requirement, also make heat treatment for hollow bars and pipes. Tianjin Emerson Commercial and Trade Co.,Ltd has large stocks for the carbon steel and low alloy steel plates and sheets, especially have the thick plate and heavy plates on stock, also can provide the special material and large size steel plates, boiler and pressure vessel steel plate, marine steel plate, hot rolled steel plate for new production. Tianjin Emerson Commercial and Trade Co.,Ltd also has large stock for hollow bars, thick wall seamless pipes and tubes. Tianjin Emerson Commercial and Trade Co.,Ltd can provide good service for customer, good quality products, fast delivery, and after-sale service, Tianjin Emerson hopes to build good cooperation with everyone interested.