Primed radiata pine flat door jamb

              The DOOR JAMB are made of FJ Solid Radiata pine / Chinese fir,pre-coated with thin primer.

Door Jamb -- Main Profiles for the North America market 

Flat Jamb & Exterior jamb  & Split Jamb & Double Rabbeted Jamb 

& Flat jamb with Door stop,etc 

Manufacturing process
---- Timber cut into board,Kiln dried, FJ,Via Shape, Sanding, two coat primer and packing etc

1) The timber logs are cut into boards.
2) then kiln dried to within 8-12% moisture range to ensure stability through the successive manufacturing processes.

3) After KD,the boards should stay in warehouse for more than 20 days (Note that diffreent size board require

    different days),to keep the material more stable and to make moisture content more uniform.It's very important.

4) The defects on the board will be cut before finger jointed.The length of moulding can be finger jonted up to 18ft,

     Or as customized.After that,the finger jointed board would be through rough sanding,then make into shape

     (as customers' drawings) by the Shape machine.

5) Then the raw unprimed moulding will be through two coat primer(Sanding between coat),then waterbase paint.

    Coating application would be applied equally on all edges have a strong adhesion to the wood substrate.

6) Shrinkable PVC film and plywood Pallet.

The Surface finish of DOOR JAMB is inspected piece by piece,
Measure the Moisture content Dado  Size Tolerance Twist(bengding) 

Plywood pallet with kiln-dried wood, free of bark & dirt or as consumers' request. Safe, Strong and well protected package durable for ocean shipping.

What Certificates Reshine Provides? 

*Your inquiry related to our products or prices will be replied in 12hours in working date .

* Every penny you paid will be valuable.

* Compensation will be covered in next order even if there is only one pc of failed product.

Should you interest in Primed door jamb, pls contact at: