Timber cut into board,Kiln dried, FJ,Via Shape, Sanding, two coat primer and packing etc
1) The timber logs are cut into boards.
2) then kiln dried to within 8-12% moisture range to ensure stability through the successive manufacturing processes.
3) After KD,the boards should stay in warehouse for more than 20 days (Note that diffreent size board require
different days),to keep the material more stable and to make moisture content more uniform.It's very important.
4) The defects on the board will be cut before finger jointed.The length of moulding can be finger jonted up to 18ft,
Or as customized.After that,the finger jointed board would be through rough sanding,then make into shape
(as customers' drawings) by the Shape machine.
5) Then the raw unprimed moulding will be through two coat primer(Sanding between coat),then waterbase paint.
Coating application would be applied equally on all edges have a strong adhesion to the wood substrate.
6) Shrinkable PVC film and plywood Pallet.

We promise:
*Your inquiry related to our products or prices will be replied in 12hours in working date .
* Every penny you paid will be valuable.
* Compensation will be covered in next order even if there is only one pc of failed product.