Specifications

SANYYO hammer crusher features high crushing ratio,fine and cubical shaped product, is the best crushing machine in highway uses

 Hammer crusher is mainly used to crush materials whose compressive strength under 140Mpa. Its working principle is simillar with Impact crusher. Hammer crusher acted as an important role in the stone crushing field. SANYYO PCF series hammer crusher crushes by the collisions between high-speed hammer and material, which features in its simple structure, high reduction ration, high efficiency, ect.. The PC hammer crushers were developed for the both dry and wet crushing of brittle, medium-hard materials for the mining, cement, coal, metallurgic, construction material, road building, and Petroleum & Chemical industries. In addition, a screen has been installed under its discharge openning which endowed SANYYO hammer crusher an extra function of initial screening.

Features and values 

Big feeding size and high productivity

 Simple structure

Both dry and wet crushing

turnover frame, easy to maintenance

sieve size can be adjusted to get different size product and even output size with cubical shaped

can be used as secondary crushing machine as well as primary crusher for limestone,concrete,ext.

Working principle

The hammer crusher' s main part is the rotor (also called hammer head). The electric motor drives the rotor for high speed revolving in the stave cavity..The material goes into the machine body from the material mouth in upside,and is crushed because of the attacking, the impact, the cutting of the high speed movement's hammer. Under the rotor, there is a lamina cribrosa, the smashing material which is smaller than the size of mesh grade can discharge through the lamina cribrosa, the large size products are brought back to the crushed area by the hammers of the hammer crusher for being recrushed until they reached the required size.,then it will be charged from the lamina cribrosa.

 

model	rotor dia.*length (mm)	Max Feeding Size(mm)	capacity(tph)	rotate speed(r/min)	power(kw)
PCF0606	640×660	200	28-46	680-1100	37-45
PCF0707	750×670	250	35-66	550-920	45-55
PCF0808	800×800	250	50-80	480-800	55-75
PCF1010	1000×1000	300	70-120	400-680	90-110
PCF1012	1000×1200	300	80-140	400-680	90-110
PCF1212	1200×1200	400	100-180	350-550	132-160
PCF1214	1200×1400	400	120-200	350-550	132-160
PCF1512	1500×1200	500	130-220	300-450	160-200
PCF1514	1500×1400	500	140-240	300-450	160-200
PCF1818	1800×1800	900	200-300	280-380	220-280
PCF2020	2000×2000	900	250-350	250-350	280-315
PCF2224	2200×2400	1000	300-400	220-320	355-450

...