Specifications

ultraviolet lamp trolley is used in disinfection and sterilization.

KD04 Ultraviolet Lamp Trolley 

[Performance]

    Working voltage: 220V

    Power of the ultraviolet luminous tube: 30W.

    Frequency: 50Hz

    Wavelength of the ultraviolet radiation: 253.7nm.

    Range of adjustable angle of the lamp holder: 0~170°.

[Application]

   The disinfection trolley is used in disinfection and sterilization.

[Applicability]

   The disinfection trolley is widely used in the medical units, resturants, hotels, stockbreeding, and scientific research institutions.

[Usage]

1. Put the disinfection trolley in the suitable place, adjust the angle of the lamp pole.
2. Put the plug in the socket of the power supply.
3. Adjust the timer on the operation desk to the required time (0~60min).
4. Acording to the disinfection range, adjust the control switch. Each control switch can control one luminous tube. When all the work is finished, turn off all the switches. When the power is cut off, hold the lamp holder and the luminous tube by one hand and press down the reset button by another hand, which can make the holder fall down to the safety box. Then close the safety gate.

[Attention]

1. The effect of sterilizing will be the best if keep the ambient temperature at 10~35°C.
2. Check the machine before use it, see if there is any electric leakage. The power supply should be grounding for avoiding electric shock.
3. The ultraviolet radiation can kill the organic cells, burn the eyes and skin if they are exposed under it for a long time. So when using it, keep away from the disinfection room or wear the protective dress.
4. When assemble and disassemble the luminous tube, should not touch its surface directly for avoiding the sterilizing effect.

[ Maintenance & Repair]

1. Keep the surface of the luminous tube clean, wipe with alcohol tampons frequently, or the sterilizing effect will be affected.
2. If the ultraviolet disinfection trolley will not be used for a long time, it should be covered with the protective cover and put it in a good airy room without corrosive gas.
3. If the luminous tube is broken, change it.
4. If there is something wrong with the fuse tube, change it (5A).