Low friction cylinder single acting
Negotiable /Piece
Min.Order:10 Pieces
Hangzhou Yasian Technology Co., Ltd.
NFCS &NSCS 50series 63series
Features
l unique design more economical than similar cylinder gas source, and reduce energy consumption;
l very low friction, 0.002MPa micro-pressure, no hysteresis phenomenon. Even in the low speed state or stopped for a long time, and be able to work smoothly.
l use of the the BF separator, the cylinder completely sealed, almost no air leakage.
l The BF diaphragm has excellent resistance to pressure, the cylinder life is very long.
l do not need to be set in the air pipe lubrication.
l NSCS series than the NFCS series frictional resistance is smaller.
In particular, specify:
l cylinder parts end caps made of die-cast aluminum cylinder body piston using a special heat-treated aluminum, with high hardness and tensile strength, stainless steel rod and screws rust may process to avoid affecting the appearance.
l U.S. importing diaphragm, abandoned at the bottom of the diaphragm cylinder diaphragm R corners at the bottom there are two or more layers of fabric design, using a single layer fabric, to improve the starting pressure sensitive properties of the cylinder.
l Cylinder replacement in three months, one year warranty policy
l BF diaphragm has excellent resistance to pressure, the cylinder life is very long.
l starting pressure:
S0 (without springs) 0.002MPa
S1 (with spring) 0.01 MPa
Response time: 0.004Sec 1M/Sec
NFCS/NSCS series Basic size chart
Diameter | Stroke | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | Ae | Spring reaction force | |
F0 | F1 | |||||||||||||||||||||||
50 | 42 | 63 | 119 | 45 | 12 | 20 | M10*1.25 | 6 | Rc1/8 | 10 | - | 50 | M6*9 | 17 | 10 | 87 | 8 | 8 | 61.5 | 73 | M6 | 1770 | 14.7 | 29.4 |
64 | 130 | 98 | ||||||||||||||||||||||
63 | 59 | 82 | 160 | 50 | 16 | 24 | M12*1.5 | 7 | Rc1/4 | 12 | - | 63 | M8*12 | 19 | 13 | 120 | 9 | 11 | 78.5 | 94 | M8 | 2730 | 23.5 | 47 |
78 |
Model Representation
NSCS | 63 | 78 | S1 | B1 | P |
1 | 2 | 3 | 4 | 5 | 6 |
1 | 2 | 3 | 4 | 5 | 6 | ||||
Movement pattern | Cylinder diameter | Cylinder stroke | Spring | Linear ball bearings (NFCS none) | Installation | ||||
NFCS | Single-acting push type (low) | S0 | Unsigned | Unsigned | Linear ball bearings, unsealed | Unsigned | Basic | ||
NSCS | Single-acting push type (ultra-low) | S1 | P | P | Linear ball bearings with seals on both sides | P | Pivot type |