Specifications
High surface areasingle-layer construction provides superior flow rates and minimizes filtration system size
PTFE Membrane Filter Cartridges, Pleated Membrane Filter Cartridge, Absolute Pleated Filter Cartridge discriptions:
Absolute Rated PTFE Membrane Filter Cartridges. cartridge filters are constructed with naturally hydrophobic PTFE membrane and polypropylene support layers and components. The PTFE membrane offers superior hydrophobicity and water intrusion resistance compared to PVDF and polypropylene membranes and the cartridge construction offers a cost -effective alternative to all fluorocarbon filters. PTFE filters are ideal for gas/vent applications and the filtration of aggressive chemicals and solvents
PTFE Membrane Filter Cartridges, Pleated Membrane Filter Cartridge, Absolute Pleated Filter Cartridge Features–Benefits:
- High surface area, single-layer construction provides superior flow rates and minimizes filtration system size
- 100% Flushed with 18 M- cm DI water and integrity tested
- Meets applicable CFR criteria and USP Class VI Biological Test for Plastics
- Filters are manufactured, flushed, tested and packaged in an ISO Class 7 Cleanroom Environment
- Manufactured using current Good Manufacturing Practices
- Each filter element stamped with pore size, lot and serial number for identification and traceability
- Media: PTFE membrane Inner core, end caps, cage: Polypropylene
- Support layers: Polypropylene
- O-Rings: Buna-N, EPDM, Silicone, Viton, Teflon Encapsulated Viton
- Micron ratings: 0.05 μm, 0.1 μm, 0.2 μm, 0.45 μm, 1.0 μm
- Typical Nominal lengths: 9.75’’, 10’’, 20”, 30’’, 40’’ 24.8, 25.4, 50.8, 76.2 101.6 cm)
- Outside diameter: 2.7’’ (6.9 cm)
- Inside diameter: 1.0’’ (2.54 cm)
- Surface area: 8.5 ft 2. (0.79 m2) – 10 inch element
- Maximum operating temperature: 203°F (95°C)
- Maximum operating pressure: 75 psid @ 70°F (5.2 bar @ 21°C) 40 psid @ 176°F (2.8 bar @ 80°C). 15 psid @ 203°F (1.03 bar @ 95°C)
- Maximum reverse differential pressure: 40 psid @ 70°F (2.8 bar @ 21°C)
PTFE Membrane Filter Cartridges, Pleated Membrane Filter Cartridge, Absolute Pleated Filter Cartridge Performance Specifications:
- Steam/Autoclave
- Cartridges will withstand at least 100 steam / autoclave 30 minute cycles @ 275°F (135°C)
PTFE Membrane Filter Cartridges, Pleated Membrane Filter Cartridge, Absolute Pleated Filter Cartridge Pore Size Specification:
- 0.05 μm: ² 50 cc/min @ 22 psig (1.5 bar)
- 0.1 μm: ² 50 cc/min @ 18 psig (1.2 bar)
- 0.2 μm: ² 20 cc/min @ 12 psig (0.8 bar)
- 0.45 μm : ² 15 cc/min @ 5 psig (0.34 bar)
- 1.0 μm: ² 15 cc/min @ 3 psig (0.2 bar)
PTFE Membrane Filter Cartridges, Pleated Membrane Filter Cartridge, Absolute Pleated Filter Cartridge Applications:
- Aggressive chemicals
- Tank Vents
- Strong acids/bases
- Compressed gases
- Solvents Photo resists
- Pharmaceutical Intermediates
- Hot DI water
- Fermentation air
How can I believe your membranes of PTFE Membrane Filter Cartridges, Pleated Membrane Filter Cartridge, Absolute Pleated Filter Cartridges are excellent and can remove particals and can it work stable ?
When we manufacture PTFE membrane filter cartridges, first we adopt excellent membranes, then we use our advanced machine to do it and test again and again before finished, our PTFE membrane filter cartridges can experienced and suitable many different working places, Your test and checking is our best proving. and your suggestion is our target.