Name: Powder Metallurgy Sintered Gear Set for Toyota Rear-view Mirror
Brand: DEWIN
Availability: InStock

Product Details

Company Information

Product Description

Photoes of Powder Metallurgy Sintered Gear Set of Toyota Rear-view Mirror

Used in This Position,

Material

IRON POWDER
material mark	Fe	Cu	C
FC-0200	rest	1.5-3.9	0.0-0.3
FC-0205	rest	1.5-3.9	0.3-0.6
FC-0208	rest	1.5-3.9	0.6-0.9

Production Flow

1. Mixing of materials

2. Press

Powder Press Machine, 3T, 8T, 16T, 200T

self-inspection in 5 minutes, sampling inspection in 20 minutes.

3. Sinter

Sintering Furnace

4. Shaping

5. Appearance

6. Soaked oil in vacuum

7. Clean

8. Package

Certifications

Packaging & Shipping

Advantages

1.Energy saving and environmental protection;
2.Low production cost (compared to cast and so on);
3.The material made of sintering and powder metallurgy method has unique chemical

composition, physical and mechanical property, compared to the traditional melting and

casting process;
4.Mass production and short production cycle, the mold cost is not expensive relatively;
5.Stable performance, also dimensions and tolerances can be fully consistent with the

requirements of various machinery and accessories;
6.Design and installation is simple, the whole machinery and accessories will not adversely

affect the performance after installation. No subsequent mechanical operations and

maintenance are needed;

7.No oil for lubrication, therefore cleaner and no out gassing;
8.High static load and dynamic load capacity, applying in widely temperature, high thermal stability;
9.Metal based materials is electrically conductive and show no electrostatic effects;
10.Applying in dirty and corrosion environment and with low wear rate and long life service;
11.Products of complex or unique shapes can be manufactured.

(Sintered Iron Self-lubricating Bearings) Material advantages:

Dry working condition, provides maintenance free operation

Excellent compressive strength, wearability and shock resistant

No oil for lubrication, low stuck possibility of friction components

High thermal stability

Can be applied in widely temperature

Suitable for radioactive environment

With lower wear rate and long life service

High static load and dynamic load capacity

Suitable for reciprocating, rotating and oscillating movement with start frequency and difficulty to form oil film occasions

Typical applications

Off-road equipment

Backhoe, graders and bulldozers

Joint bushes for excavator

Pin bushes for hydraulic cylinder

Link bushes for construction and heavy industry machinery, like wheel loader, dump truck, forklift, crane etc.

Tie-bar, cross head pin bushes for injection molding machinery, die casting machinery

Industrial robot joint bushes

Escalators

Automotive and railroad application

Heavily loaded machinery and equipment applications

Guide bushes for mold

FAQ

Why do I choose you?

Profession and reliability. Everyone likes to talk big, but DEWIN choose to be honest with ourselves and customers. We get our passion like fire! Say what you say how you say it whenever you sayin' it.
Just remember how you said it when you was sprayin' it.

How to deal with quality problem?

When quality problem does show up, we will take our responsibility.

You will get help from beautiful ladies of our QC team.

New products will be prepared, as well as discount and secret gifts!

Besides, we have a PPAP of each shipment, so that we know which shipment goes bad. We will cut off production line to avoid more loss.

Can I get a discount?

Talk to us, you will get what you want!

Can I get free samples?

For standard and small-size products, of course we can provide free samples.

For other products, we can discuss about it.

Would you like to buy a ticket for the sample shipment?

What should I do if the products rusted in her trip?